Specifications

2014 new Aluminium Plastic Composite Panel Production Line
Sale the same line in&out of China for 56sets;
with20years experien

Aluminium Plastic Composite Panel Production Line

 

We WILL PROVIDE TECHNICAL SUPPORT FOR ALL LIFE TIME WITH OVER 20 YEARS EXPERIENCES .

 

CHINA PLAS2013 GuangZhou fair

1.Usage:This line is specially used to make the aliuminium-plastic composite panel;

2.The kind of panel is for the interior and exterior wall decoration;

3.Production description : the effective width of the finished product is 1220mm to 1580mm and the thickness is 1.0mm to 5.0mm ,and the thickness of the aluminium sheet applicably is 0.04-0.5 mm;

4.Out put :The maximium output is 550kg/h .

 

Extruding Unit:

 

1.The screw and barrel are made of 38CrMoALA nitrided steel of high quality ,and nitide hardning ,The screw 's flight land is wearing -resistant as it is coated with alloy of 2mm .

2. Adopted the vented-type screw with bigger ratio of the screw length to diameter R (L/D35:1),and with barrier-tye mixing section,which ensures the melting effect of the materials.

3. The gear reducer is maufactured according to the standard of ZBJ19004 -8.The gear ,which is processed by carbon case hardening and grinding running precise,stong,wear-resistant and stable .

4.Equipped with water circulating vaccuum pump,to extract forcibly the water vapor which is produced during the material melting ,making the PE board smooth,with no bulble .

5.Equipped with double -station plate-type change secreen ,the screen can be changed quickly by hydraulic units without stop the running machine .The imourity in the plastic can be filtered effectively .

6.The main DC motor is using Britain-style speed governor to adjust the speed .

7 There are flexible restriction rods in the T-die in order to adjusti the gap of the mouldlip as so to meet with requirment of the thickness.

 

FOR MORE INFOMATION ,PLS DON'T BE HESTATE TO CONTACT US ,THANKS.

 Commpounding unit

Cutter and transferring unit

The unit is eqtuip with OLC programmer to keep the cutting and transportation synchronously ,The sample of product can be obtained and to test the peeling strength betweem the aluminium and the plastic anytime ..

 Production show :