Product Details

Product Description

1. Will your CTO Active Carbon Filter Cartridge Machine blocked?

2. Will your cto filter making machine make filter which is not smooth?

3. Wil your cto filter cartridge machine exploded?

Raw material of CTO active carbon filter cartridge

Active carbon block powder---There are lots of different kinds of active carbon powder raw material. The types of activated carbon can be distinguished into as below:

1. Wooden activated carbon: raw material such as wood flour or wood charcoal or...

2. Shell activated carbon: raw material such as coconut shells, walnut shell, apricot shell or..

3. Coal activated carbon: raw material such as peat, lignite, bituminous coal, anthracite or..

4. Petroleum activated carbon: raw material such as asphalt

5. Regeneration carbon: raw material such as wasted carbon

PE powder---Mix PE powder with active carbon block to stick them together for CTO carbon filter

Different types of CTO active carbon block filter cartrdige

1. Granular activated Carbon Filter(GAC):

Granular active carbon is filled in the abs plastic shell and is wrapped with pp spunbond fabric to prevent powder out of the filter, then welding machine weld the end cap at both ends

2. Compression type activated carbon filter(CTO):

The coal carbon powder, whose iodine number is higher than 900, is mixed with food grade binding material by compression and sintering to make CTO filter

A. Sintering active carbon filter:

Activated carbon powder + polymer, meltecd into porous materials ->200 ~ 300 degrees high temperature - > limited capacity

B. Compression active carbon filter:

Activated carbon powder material + inorganic liquid adhesive - > high pressure compression - > aperture is hard to control

C. Extrusion active carbon filter:

Activated carbon + ordinary hot melt resin - > melted and extruded-> high capacity, low production cost

(PS: WUXI ANGE CTO Active Carbon Block Filter Cartridge Making machine belongs to the extrusion active carbon filter making machine )

CTO active carbon block filter cartridge includes

CTO active carbon block water filter cartridge is made by high-quality fruit shell carbon and coal activated carbon as raw material, as well as food grade adhesive, with high technology and special technique. It combines the adsorption, filtration, interception and catalysis functions together. It can effectively remove the organic matter, residual chlorine and other radioactive substances in the water, and it also can decolor and remove the peculiar smell. It is an ideal new generation products in the air purification industry.

2016 Automatic high quality CTO active Carbon Block Filter Cartridge Making Machine includes the folllowing parts:

Dust Free workshop~! Cooling for high quality and high capacity~! Auotomatic cutter~!

Controller-Inverter is better than speed adjuster. If you want to use famous worldwide brand like ABB, we can customize for you.

Water cooling system- High capcity and high quality

Name: 2017 Best quality CTO Active Carbon Block Filter Cartridge Machine from WUXI ANGE
Brand: WUXI ANGE
Availability: InStock

CNC Ultrasonic Welding Machine

Operation conditions:

1) Max operating temperature: 70°C

2) Materials: 100% polypropylene

3) Interface of filter cartridge: flat

4) Max differential pressure: Positive 0.4Mpa

The parameter of CTO carbon filter making machine

ITEM	Description
Total Installed Power	15 kw (with auto mixer and auto feeder) 12 kw (without auto mixer and auto feeder)
Actual Running Power	8~10 kwh
Raw material:	80%-90% Active carbon (granule) & 10%-20% PE powder (glue) Tips: When you purchase the active carbon please confirm with the provider with below two important parameters. Particle Size: for example: normal size is 8-20 mesh or 30-60 mesh. Others also available Iodine value: coconut carbon is about 800~ 1000mg/g; coal carbon is about 300~500 mg/g; When you purchase the PE powder please check the MFI of the PE.
Inside diameter:	10mm-80mm (free to customize)
Outside diameter:	29mm-120mm (free to customize)
Length:	5",10",20",30",...(free to customize)
Output:	1400pcs (for ID=28mm OD=60mm)
Machine Weight:	1100~1500kg.
Voltage:	Three-phase 380V/50HZ ; One-phase 220V/50HZ
Floor area of the whole product line:	1.5m*9m
Minimum require 13.5 square meter;	20-30 square meter is better.
Waste of material for starting machine:	about 5 kg , but the wasted material could be reused after crushed and mixed in the mixer

Features of CTO carbon filter cartridge machine

1.Good quality from our machine

2.Each parts produced by European standard company

3.Electric-saving

4. We have been producing the machine for mare than 20 years.

5.Easy operation

(1) our engineer will teach you until you can operation by yourself

(2)Automatic feed machine and independent ability to design of CTO cutting machine skills in china.

CTO carbon Block Filters :

InWW W
We can make compounded filter cartridge with pp melt blown filter and active carbon block filter

Approved CE and some other certificates:

Packaging & Shipping

Payment :

T/T ,40% deposit and balance before shipment

Package:

Plastic film and Plywood Case(CAN BE CUSTOMIZED)

Delivery Date:

30 ~ 35days workdays after deposit

Our Services

After-sell Service

Warranty: 1 year.

If non-human cause of quality problems occurs, we provide EXW item free parts

If this cause by incorrect operations, we won’t provide free replacement

We provide detailed instruction and maintenance documents about how to operate the machines as well as unlimited long term support by email or phone call.

Company Information

Wuxi ANGE Environmental Technology Ltd, located in WUXI, is an ISO 9001 company with an independent CNC center. We excel at producing CE certificated high quality PP spun/melt blown filter cartridge making machine, pp string wound filter production line/CTO active carbon block filter production line/PP melt blown nonwoven fabric production line. Both sales department and R&D department are bachelor degrees, who can promise perfect English service and technical support overseas. We have more than 20 years’ experience in machine design. Welcome to pay a field inspection to our factory and check the excellent machines yourself!

CTO activated-carbon filter is composite filter by using all kinds of high-quality activated-carbon whith 30~60 mesh and iodine value more than 1000 as meterial, combined with high polymer material

1. PP melt blown filter cartridge(0.01~100micro)

PP melt-blown filter cartridge is made from 100% food-grade polypropylene.

2. PP string wound filter cartridge(1~200miceo)

PP string wound filter cartridge is made from 100% food grade pp yarn and pp core(or stainless steel core or other materials).

3. CTO Active carbon filter cartridge(0.1~10micro)

CTO active carbon filter cartridge is made from well mixed active carbon powder and PE glue.

4. Compound filter cartridge (1 micro)

The compound filter is made of inner pp melt blown filter cartridge and outer layer CTO filter. It has better filtering effec

CTO Active Carbon Block Filter Performance:

1.Integrate all the functions such as adsorption,filtering,intercept,catalysis as a whole.

2.Resisted from acid,alkali,salt and didfferent kinds of organic solvents.