Keyu Factory Incubator Float Valve Parts
USD $0.5 - $6.5 /Piece
Min.Order:1 Piece
Chongqing Yuhui Keyu Machine Electricity Equipment Corp. Ltd.
Keyu Factory Incubator Float Valve Parts
Other float valve you may be like
Mode | 1/2" plastic float valve DN15EX |
Install Size | 257.40mm(Maximum) |
Thread | 1/2" Inch |
Body Material | ABS(Acrylonitrile Butadiene Styrene plastic) |
Float Ball Material | PE(Polyethylene) |
Seals Material | SR(Silicon Rubber) |
Working Pressure | 0.01- 1.2Mpa(0.1Mpa=1Bar=14.5Psi) |
Working Temperature | 0-70°C |
The actual application depends on the specific circumstances.
DN15EX plastic float valve can be installed in the water tank, humidifier, evaporative cooler, incubator, gardening, livestock, etc.
Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation. Each of install method will not affect the performance.
Tips
1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the garbage out in time.
4.Please do not use the cleanser which will cause damage when clean the float valve.
About us
We have specialized in plastic float valve over 15 years, have getted a lot of international partners attention and favor for many years. With the competitive price, stable quality and best service, we have built a good relationship with the customer all over the world.
For years many novel, suitable and long life float valves have been developed to meet the needs of market, now more than 10 patents have got the authorization. The sealability and body strength(premium grade) of our float valve have passed the inspection of the Quality Inspection Bureau.
Why Choose Us
Over 50 models to choose.
Eight years export experience.
Our products have a variety of patent protection.
The professional manufacturer plastic float valve.
Supply float valve to more than 500 clients overseas.
Q: Are you a factory or trading company?
A: We are a factory.
Q: Do you offer samples?
A: We offer 2-3 samples, only charge for freight.
Q: Which payment methods do you accept?
A: We prefer confirmed 100% irrevocable letter of credit payable at sight.
Possibly T/T 30-50% of total amount as down payment before shipment and left balance before releasing documents.
All by T/T before shipment, especially for the case that the total deal amount is small.
Some other payments are also welcome if the amount is very small, such as Paypal, Western Union, etc.
Q: When are you going to deliver cargo after payment?
A: It is depend on the quatity you had ordered, under one thousand generally within 30 days.
Q: Do you offer OEM and custom service?
A: Yes, we offer OEM and custom service about high temperature ,material requests, strong acid and alkali.