1/2 inch Magnetic Float Switch
USD $0.5 - $6.5 /Piece
Min.Order:1 Piece
Chongqing Yuhui Keyu Machine Electricity Equipment Corp. Ltd.
1/2 inch Magnetic Float Switch
Other products you may be like
Mode | 1/2" small plastic float valve DN15H |
Install Size | 177.00mm(Maximum) |
Thread | 1/2" Inch |
Body Material | ABS(Acrylonitrile Butadiene Styrene plastic) |
Float Ball Material | PE(Polyethylene) |
Seals Material | SR(Silicon Rubber) |
Working Pressure | 0.01- 1.2Mpa(0.1Mpa=1Bar=14.5Psi) |
Working Temperature | 0-70°C |
The actual application depends on the specific circumstances
DN15H plastic float valve can be installed in small water tank, humidifier, ice machine, incubator, aquariums, gardening, livestock, etc.
Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation. Each of install method will not affect the performance.
Tips
1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the garbage out in time.
4.Please do not use the cleanser which will cause damage when clean the float valve.
Eight years export experience
Over 50 models of different float valves to choose
Our float valves have a variety of patent protection
Supply float valves to more than 500 clients overseas
The professional manufacturer water tank plastic float valve
Supporting OEM and ODM service
High temperature ,material requests, strong acid and alkali custom service.