Keyu Quick Fill Cistern Float Valve
USD $0.5 - $6.5 /Piece
Min.Order:1 Piece
Chongqing Yuhui Keyu Machine Electricity Equipment Corp. Ltd.
Toilet Water Tank Inlet Valve is a model of mechanical plastic float valve. It is made of Keyu new patent technology-used the differental pressure to open or close the valve. At the same valve volume, highly improve the water flow rate, save much of time to recharge water. DN20CH float valve is a good helper to replenish water for irrigation system water tank.
Other float valve you may be like
Mode | Keyu Hot High Quality Torneira De Boia |
Install Size | 255.00mm(Maximum) |
Thread | 3/4" Inch |
Body Material | ABS(Acrylonitrile Butadiene Styrene plastic) |
Float Ball Material | PE(Polyethylene) |
Seals Material | SR(Silicon Rubber) |
Working Pressure | 0.01- 1.2Mpa(0.1Mpa=1Bar=14.5Psi) |
Working Temperature | 0-70°C |
The actual application depends on the specific circumstances
DN20CH plastic float valve can be installed in water tank, evaporative cooler, cistern tank,aquariums, gardening, irrigation, livestock, etc.
Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation. Each of install method will not affect the performance.
Tips
1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the garbage out in time.
4.Please do not use the cleanser which will cause damage when clean the float valve.
Eight years export experience
Over 50 models of different float valves to choose
Our float valves have a variety of patent protection
Supply float valves to more than 500 clients overseas
The professional manufacturer water tank plastic float valve
Supporting OEM and ODM service
High temperature ,material requests, strong acid and alkali custom service.