Supersonic frequency induction hardening machine
USD $1,000 - $9,800 /Set
Min.Order:1 Set
Shenqiu Yongda High Frequency Equipment Co., Ltd.
Supersonic frequency induction hardening machine
Model | WZP-160 |
Work power | 3 phase 380V+/-10%, 50-60HZ |
Input voltage | 320V-420V can be changed, depend on your country's electric power |
Input current | 6-160A |
Input power | 3-85KW(power adjusted stepless) |
Oscillation frequency | 10-50 KHZ |
Cooling water pressure | 0.3 MPA |
Size of geneartor: Transformer | 740*403*895 735*490*465mm |
Weight of generator ; transformer | 55kgs; 74kgs |
Water cooling protection point | Below 50 degree celsius |
1. It adopts the most advanced IGBT frequency conversion control technologies to ensure the high efficiency and maximum output power.
2. It has the constant current and power control function, which can significantly optimize metal heating process, realize the high efficient and fast heating and bring into play the superior performance of the products.
3. The comprehensive full load design is available for 48-hour continuous operation.
4. A maximum ten types fault protection and display of over-current, over-voltage, water shortage and phase missing can provide higher reliability and durability.
5. It has the function of three-stage time setting represented by heating-heat preservation-cooling. Furthermore, the power for heating and heat preservation is available for independent regulation, which can facilitate the heating and heat preservation, which is applicable to places requiring bulking and repeated heating.
6. It is safe and reliable, and requires no equipments of ten thousand voltage, and thus can ensure the safe operation.
7:Adopts the latest MOSFET, IGBT power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output power.
8:Power consumption is half of traditional electron tube high frequency induction heating equipments under the same conditions.
9:With 100% load design, can work for continuous 24-hour a day. Infrared temperature detector can be equipped to realize the automatic control of temperature, improve heating quality and simplify manual operation.
10:With heating-insulating-cooling three stages function setting, the heating and insulating time required can be get to accommodate to the batch and repeated heating situations.
11:With multiple status display of overflow, over voltage, low water, phase failure and load malfunction, providing higher reliability and sustainability.
12.Select power supply according to the power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
WZP-160 induction hardening machine
Control panel of WZP-160 induction hardening machine
Water and electric connection
Debugging machine workshop
Hardening work pieces
40KHZ frequency of about φ10 about small precision may quench a small shaft, hardened layer of 1mm or less to maintain, large may φ250
Diameter of the shaft, but also about quenching φ500 gear.
1, auto parts, motorcycle accessories quenching.
2, the mechanical parts of the heat treatment. Such as the various gears, sprockets, all kinds of shafts, spline shafts, pins, etc. quenching.
3, the machine tool industry, the rail surface hardening treatment.
4, pliers, wrenches, screwdrivers, hammers, axes and other heat treatment.
Gear induction hardening
Shaft induction hardening
More use cases
1. all kinds of shaft hardening, hardened layer 1.5-3mm, diameter Φ10mm-250mm, all types in the hole quenching.
2. Φ5-Φ12 wire annealing.
3. all kinds of brazing welding head.
4. Φ25 bar through the following heat, the speed much faster than the SCR. Φ60mm-Φ100mm bar diathermy
5. all kinds of chains, sprockets treatment
6. Angang weight of 80 tons 3 meters in diameter hardened gears
7. Hanjiang River Bridge with a thickness of 17.5mm Φ1016mm steel heated to 1,000 degrees bent shape.
8. necking forming various types of steel heat
9. copper bar annealing, wire annealing
10. Machine Tool Gears, Sprockets quenching
11. all kinds of heating elbow flared necking.
12. Φ50mm 3mm thick stainless steel annealing
Packing for induction hardening machine
1.Two wooden cases (plywood) or cartoon.As you request.
Inside,will be filled with plastic foam,for waterproof and shockproof.
2.Accessories: high frequency cable 2 pcs, (connect generator and transformer)induction coils,foot switch and installing and operating instructions
3. Gross Weight: 130kgs
4. Total volume: about 0.8CMB
Shipping: by sea LCL(less than container load) or by air.
Dear buyer,
In order save time and improve communicate efficiency,please kindly also tell us specifications of your work pieces and heating requirements:such as heating temperature, time requirments(output per hour),local or whole parts heating, application/purpose etc.
So that we will recommend you suitable machine model as soon as possible.
If you know little about induction heating equipment,it doesn't matter,please direct send us inquiry. Let us help you !
One year free replacement spare parts !
Provide long-terms technical support !
Sincerely provide service for you!