Name: High frequency induction tempering machine for metal
Brand: Yongda
Availability: InStock

Product Details

Specifications

high frequency induction tempering machine
1.power:3-90kw
2.adopts IGBT mobules
3. 10-50KHZ
4. enery save 30%

High frequency induction tempering machine for metal

Product Description

Heat treatment process
Tempering → In order to reduce the brittleness of the steel, make the hardened heat preservation, a suitable temperature, higher than room temperature and lower than 710 ℃ , and then cooling.This process is called tempering.
Technical parameters of WZP-160 hf induction tempering machine

Model	WZP-160
Work power	3 phase 380V+/-10%, 50-60HZ
Input voltage	320V-420V can be changed, depend on your country's electric power
Input current	6-160A
Input power	3-90KW(power adjusted stepless)
Oscillation frequency	10-50 KHZ
Cooling water pressure	0.3 MPA
Size of geneartor: Transformer	generator740403895mm transformer 735490465mm
Weight of generator ; transformer	55kgs; 74kgs
Water cooling protection point	Below 50 degree celsius

High frequency WZP-160 induction tempering machine

High-frequency induction heating equipment use case description:
     1. all kinds of shaft hardening, hardened layer 1.5-3mm, diameter Φ10mm-250mm, all types in the hole quenching.
     2. Φ5-Φ12 wire annealing.
     3. all kinds of brazing welding head.
     4. Φ25 bar through the following heat, the speed much faster than the SCR. Φ60mm-Φ100mm bar diathermy
     5. all kinds of chains, sprockets treatment
     6. Angang weight of 80 tons 3 meters in diameter hardened gears
     7. Hanjiang River Bridge with a thickness of 17.5mm Φ1016mm steel heated to 1,000 degrees bent shape.
     8. necking forming various types of steel heat
     9. copper bar annealing, wire annealing
     10. Machine Tool Gears, Sprockets quenching
     11. all kinds of heating elbow flared necking.
     12. Φ50mm 3mm thick stainless steel annealing

Our workshop

Annealing → the workpiece is heated to a suitable temperature,with different incubation times,depending on the material and size of the workpiece , and then slow cooling (the cooling speed is the slowest),so as to make the internal organization of the metal achieve equal or at the equilibrium state, to obtain a good process properties and performance, or prepare for further hardening.

Normalizing → the workpiece is heated to a suitable temperature in the air cooled. The effect of normalizing is similar to annealing , but the former process more finely tissue obtained, generally used to improve the cutting performance of the work piece. Sometimes normalizing also can be used for a number of workpiece demanding not high as a final heat treatment.

Hardening → Heating work piece to a certain temperature.Cooling rapidly at water, oil, or other inorganic salts, organic aqueous solution etc. quenching medium. After quenching,steel work piece getting hard , but also brittle.

Annealing, normalizing, hardening and tempering is the overall heat treatment of the "four fire", which is closely related to the quenching and tempering, often used in conjunction, are indispensable.

"Four fire" with different heating temperatures and cooling methods,it turns out different heat treatment processes. In order to obtain a certain degree of strength and toughness, sometimes combine quenching and tempering process,called quenched and tempered.

Packaging & Shipping

Packing for high frequency induction tempering machine

1.Two wooden cases (plywood) or carton.

Inside,will be filled with plastic foam,for waterproof and shockproof.

2.Accessories: high frequency cable 2 pcs, (connect generator and transformer)induction coils,foot switch and installing and operating instructions

Shipping: by sea LCL(less than container load) or by air.

Contact Information

If you have any metal work parts require heating, tempering ,hardening, anenaling etc. heat treatment, please must think us- Shenqiu Yongda HF Equipment CO.,ltd ,since 1996,rewarding your trust !

Sincerely provide service for you!