Specifications

Y5-47 Boiler Fan with large wind characteristics is designed for 0.2~2ton/hr industrial burner or living burner.

Y5-47 Series Boiler Centrifugal Fan 

specification and model:

Model(No.)	Power(kw)	Speed(r/min)	Volume Flow( m³/h)	Total Pressure(Pa)
4c	5.5	3550	2932~5564	2221~1501
	4	3150	2602~4937	1746~1180
	3	2800	2313~4388	1377~932
	2.2	2500	2065~3918	1097~742
5c	11	3150	5304~9851	2819~1913
	7.5	2800	4715~8757	2223~1509
	5.5	2500	4210~7818	1769~1202
	4	2240	3772~7005	1419~964
6.3c	22	2800	9432~17516	3545~2403
	15	2500	8421~15639	2819~1533
	11	2240	7546~14013	1798~1221
	7.5	2000	6737~12511	3323~2253
8c	30	2000	13794~25619	2686~1823
	22	1800	12415~23057	2118~1438
	15	1600	11035~20495	1619~1100
	11	1400	9656~17933	4483~2958

 

• Function:

  
  Y5-47 CENTRIFUGAL FAN with high efficiency, low noise, large wind characteristics and stainless steel material which has anti-corrosion effect. Boiler fan is for variety fuel and equip with dust removal device, which is designed for 0.2~2ton/hr industrial burner or living burner. The transmission of air temperature don’t exceed 250°C.
  Boiler fan makes of single inhalation, there are No.3.15~No 12.5 type and many others types.
  Boiler fan has two forms as left rotation and right rotation. Look squarely at fan from transmission part, impeller rotates as clockwise called right rotation fan, with” right” representation; impeller rotates as counter-clockwise called left rotation fan, with “left” representation. Fan exit position express with frame exit angle. “Left” & “right” total have four kinds angles as 0°,90°,180°270°.
   

• Work Principle:

  
  Through motor works transmission part so as to impeller to rotate at a high speed. Rotating mechanical energy is converted to gas pressure energy and kinetic energy, and transport the air out through machine frame.
   

• Structure:

  
  Fan consists of impeller, inlet wind tuyere, frame, transmission part etc.
  1)Impeller make of 12 pieces of backward arc vane (Q235A material), weld between spiral bevel top cover and flat rotary table. Through static and dynamic balance correction, therefore has stable operation.
  2)Machine frame makes of ordinary steel sheet to weld for snail shape
  3) Whole structure of inlet wind tuyere makes to glaive hydrodynamic form, use bolt fix to side of entrance of machine frame.
  4) Transmission part consists of main spindle, bearing box, pulley etc. Main spindle makes of high quality steel; overall structure of bearing box uses rolling bearing what lubricate with calcium & sodium grease.