Specifications

sawdust dryer
1.lower cost consumption
plete function
3.stable properties and easyoperation
4.Large drying capacity

 CE approved high quality professional wood sawdust dryer  

 

 

Brief introduction:

This kind of Sawdust Dryer is mainly used to prepare suitable moisture raw material for biomass briquette press. For briquetting press, it is only to control the moisture of raw material at a reasonable range that can make good result of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.

 

 

Sawdust Drying Machine Series

1. YGHJ Series Single Stove Dryer

The Moisture reducing rate of the dryer YGHJ series is 8-12%. This dryer is equipped with one hot air boiler, it is suitable for drying raw material with moisture content less than 20-25%.If the moisture content of the raw material is higher than that, it will need several times of drying to achieve the requested moisture content for briquetting.

2. YGHJ Series Double Stove Dryer

This double stove dryer is a newly developed dryer with two hot air boilers, it is suitable for drying raw material with moisture content of 20% -50%, it can reduce moisture from 20%-50% to 8-12% via only one passage.
 

 

Technical parameters

  

Model	Capacity	Power	Weight	Moisture rate of powdery raw materials
YGHJ-1	300kg/h	4.5kw	1100kg	under 30%
YGHJ -2	400-500kg/h	7.5kw	1860kg	under 30%
YGHJ -3	500-600kg/h	11kw	2280kg	under 30%
YGHJ -4	700-900kg/h	15kw	3080kg	under 50%

 

Operation Principle of the sawdust drying machine
 
The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock. In this system, wet material is input into hopper by screw feeder. Fuel furnace produces large volume of hot air. Those hot air is driven into steel pipes, mixed with wet sawdust and moved through curving pipes and drying chamber by the power of fan blower. Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe; moisture evaporates as the material traverses along the steel pipe and is rendered dry at the discharge end. Humid air is continuously exhausted, thus the material is dried.

 

 The test of sawdust dryer

 

Installation Service

Our factory could send one or two of our engineers to buyer’s place to direct the installation and 

give the operation training.

After-sale service

Wood pellet machine,we promise,with 3 year warranty,within three year time from the date of purchase,if malfunctions arise due to manufaturing quality  factor,factory is responsible for free maintenance.

 

Gongyi Yugong Machinery Manufacturing Factory

                  ---- Classic heritage, Top selection

Our factory established in 1985,is a highly professional and experienced manufacturer for pellet machine,briquette machine,wood crusher,sawdust dryer,pellet making line and semi auto brick machine,full auto brick machine,combining development,design, manufacture,sales and services. 

 Frequently Asked Questions:

1. Q: Are you a trading company or a manufacturer?

 A: We are a manufacturer, which has almost 20 years of experience in this industry.

2. Q: How can I get to your company?

 A: You can get a flight to Zhengzhou Xinzheng International Airport  . and we can go 

to airport to pick you up directly.All our clients from home or abroad, are warmly welcome

 to visit our factory and inspect our products! 

3. Q: How long is your guarantee?

A: One year(Calculated from the equipment arrives the customer’s side.). After this period

 we will definitely support you when needed. You will be welcome to contact us with any problem 

may happened.

4. Q: Will you send engineers to install the plant?

A: yes, but at an extra cost payable by the customer. Or you can get local contractors to 

do the commissioning and we send one supervising engineer.

 

 High quality, high service

Your satisfaction is our permanent pursuit!