Specifications

1. Reasonable structure
2. High efficiency, low energy consumption
3. Convenient for transportation
4. Reliable operate

Working principle:
    Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.

 

 

 Technical parameter

Specific-ations(m)	Capacity(t/h)	Main motor		Main gear box		Weight(t)
		Power(kw)	Model	Model	Speed reduction ratio
ø1.2*10	2.5	7.5	Y160M-R3	ZL50-16-I	-----	13.5
ø1.5*12	3.3-4.9	10	Y160L-6-B3	JZQ500-III-2F	-----	18.9
ø1.5*15	4-6	18.5	Y200L1-6	JZQ500-III-2F	-----	21
ø1.8*12	4-6	18.5	Y160L-6	ZQ50-16II-2	16.46	22.83
ø2.2*12	7-12	18.5	Y200L7-6	JZQ650-III	31.5	37.6
ø2.2*14	7-12	22	Y200L7-6	JZQ650-III	31.5	40
ø2.2*16	12	30	Y225M-6	JZQ750-III	31.5	45
ø2.4*14	12	30	Y250M-6	JZQ750-III	31.5	51
ø2.4*18	10-13	37	Y250M-6	ZL85-13-I	27.16	54
ø2.4*20	10-14	37	Y250N-6	ZL85-13-I	27.16	54.14
ø3*20	25	55	Y250M-4	ZL100-16-I	41.52	78
ø3*25	32-36	75	YR280M-4	ZL100-16-I	41.52	104.9

Special kind of dryer machine can be produced according to customer's requirement.

We specialize in machinery manufacturing for 28 years,and our main products are Biomass/Wood Pellet production line.