Specifications

rotary dryer
1. Reasonable structure
2. High efficiency
3. Easy to operate and handle
4. Reliable operate

Gongyi Yugong Brand Wood Chips/Sawdust Rotary Dryer

 

Rotary Dryer Introduction
HC series rotary  dryer is also called roll dryer, which is handling by bringing it into direct contact with a heated gas. The rotary dryer is made up of a large, rotating cylindrical tube, The rotary dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the rotary dryer under.

Rotary Dryer Working principle

Material to be dried enters the rotary dryer, and as the  rotary dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the rotary dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the rotary dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.

Our factory promises:reasonable price,short production time and satisfactory after-sales  service.

 

 

Rotary Dryer Technical parameter

Specific-ations(m)	Capacity(t/h)	Main motor	Main gear box	Weight(t)
		Power(kw)	Speed reduction ratio
ø1.2*10	2.5	7.5	-----	13.5
ø1.5*12	3.3-4.9	10	-----	18.9
ø1.5*15	4-6	18.5	-----	21
ø1.8*12	4-6	18.5	16.46	22.83
ø2.2*12	7-12	18.5	31.5	37.6
ø2.2*14	7-12	22	31.5	40
ø2.2*16	12	30	31.5	45
ø2.4*14	12	30	31.5	51
ø2.4*18	10-13	37	27.16	54
ø2.4*20	10-14	37	27.16	54.14
ø3*20	25	55	41.52	78
ø3*25	32-36	75	41.52	104.9

 

Special kind of rotary dryer machine can be produced according to customer's requirement.

As a professional rotary dryer machinery manufacturing factory, we believed that success comes to a great service.

 

Any question or requirement about our rotary dryer,pls contact me freely.

 

Looking forward to your good news.