REALTEK RTL8191RU RTL8191 8191 Single-Chip IEEE 802.11b/g/n 1T2R WLAN Controller with PCI Express Interface
USD $0.5 - $2 /Piece
Min.Order:1 Piece
Shenzhen Visen Electronic Co., Ltd.
REALTEK RTL8192SE Single-Chip IEEE 802.11b/g/n 2T2R WLAN Controller with PCI Express Interface
REALTEK RTL8201E RTL8201 8201 Single-Chip/Port 10/100Mbps Ethernet PHYceiver with Auto MDIX
REALTEK RTL8211B Integrated 10/100/1000 Gigabit Ethernet Transceiver
REALTEK RTL8211BN Integrated 10/100/1000 Gigabit Ethernet Transceiver
REALTEK RTL8211C Integrated 10/100/1000 Gigabit Ethernet Transceiver
The Realtek RTL8191RE is a highly integrated single-chip MIMO (Multiple In, Multiple Out) Wireless LAN (WLAN) solution for the wireless high throughput 802.11n specification. It combines a MAC, a 1T2R capable baseband, and RF in a single chip. The RTL8191RE provides a complete solution for a high throughput performance wireless client.
The RTL8191RE baseband implements Multiple Input, Multiple Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) with 1 transmit and 2 receive paths (1T2R) and is compatible with the IEEE 802.11n specification. Features include one spatial stream transmission, up to two spatial streams reception, short guard interval (GI) of 400ns, spatial spreading, and transmission over 20 MHz and 40 MHz bandwidth. At the receiver, extended range and good minimum sensitivity is achieved by having receiver diversity up to 2 antennas.
For legacy compatibility, direct sequence spread spectrum (DSSS), complementary code keying (CCK) and OFDM baseband processing are included to support all IEEE 802.11b and 802.11g data rates. Differential phase shift keying modulation schemes, DBPSK and DQPSK with data scrambling capability, are available along with complementary code keying to provide the data rates of 1, 2, 5.5 and 11Mbps with long or short preamble. The high speed FFT/IFFT paths, combined with BPSK, QPSK, 16QAM, and 64QAM modulation of the individual subcarriers and rate compatible punctured convolutional coding with coding rate of 1/2, 2/3, 3/4, and 5/6, provides the maximum data rate of 54 Mbps and 300 Mbps for IEEE 802.11g and 802.11n MIMO OFDM respectively.
The RTL8191RE builds in an enhanced signal detector, an adaptive frequency domain equalizer, and a soft-decision Viterbi decoder to alleviate the severe multi-path effects and mutual interference in the reception of multiple streams. For better detection quality, receive diversity with maximal-ratio-combine (MRC) applying up to 2 receive paths are implemented. Robust interference detection and suppression are provided to protect against Bluetooth, cordless phone, and microwave oven interference. Receive vector diversity for multi-stream application is implemented for efficient utilization of MIMO channels. Efficient IQ-imbalance, DC offset, phase noise, frequency offset and timing offset compensations are provided for the radio frequency front-end impairments. Selectable digital transmit and receiver FIR filters are provided to meet transmit spectrum mask requirements and to reject adjacent channel interference, respectively.
The RTL8191RE supports fast receiver Automatic Gain Control (AGC) with synchronous and asynchronous control loops among antennas, antenna diversity functions, and adaptive transmit power control function to obtain the better performance in the analog portions of the transceiver.
The RTL8191RE MAC supports 802.11e for multimedia applications, 802.11i for security, and 802.11n for enhanced MAC protocol efficiency. Using packet aggregation techniques such as A-MPDU with BA and A-MSDU, protocol efficiency is significantly improved. Power saving mechanisms such as Legacy Power Save, U-APSD, and MIMO power saving reduce the power wasted during idle time, and compensate for the extra power required to transmit MIMO OFDM. The RTL8191RE provides simple legacy and 20MHz/40MHz co-existence mechanisms to ensure backward and network compatibility.
Accepts wire transfer, Western union, Paypal and Moneygram.
All items are priced each.
All items are subject to availability and passing our QA inspection.
Packaging: Safety package(Carton)
Shipping:
1. We will ship the items within 2 working days after the payment confirmed.
2. We can ship to you by UPS/DHL/TNT/EMS/FedEx/HK post/china post. Please contact us directly and we will use your preferred ways. For the Countries & Regions where EMS cannot deliver, please choose other shipping ways.
Warranty:
1.Our side always double check all the products before delivery to make sure correct.
2.All components we sell has 30 days return policy from the day of shipment, but if the damage is man-made, we will be unable to change for you.