Specifications

tumbler vibratory 300L with pnematic free noise cover and frequency control box
it's free noise .high quality

  

vibratory tumbling equipment 300L  with pnematic free noise cover

 

Vibratory tumble finishing systems produce a cutting action by shaking the processing vessel (the finishing tub) at a high speed,
causing the tumbling media and parts to scrub against each other. This scrubbing action precisely abrades the parts to remove burrs.
A shaft with rotating eccentric weights mounted on the tub produces the shaking action.

Vibratory deburring machines and finishing systems produce a cutting action that is very thorough.
They remove material from pockets and recesses and inside bores, which cannot be done in a barrel tumbler,
so they can be used for very delicate or intricate parts. With high speeds and a short stroke,
they can also run large bulky parts without damage. Large wing spans and landing struts are routinely run in these systems.
Vibratory finishing systems also lend themselves to be automated easily.
They can be fully automated for a flow-through operation or used as a basic batch operation.
The action is that of a small orbit at a high speed and thus is very powerful, yet causes little stress on the parts  
     

              

Model	Capacity	Motor Power	Motor speed	PU	Weight(kg)	Size(L×W×H)mm
			(r/min)	(mm)
HST-60(A)	60L	0.75kw	1450	12	100	700×640×750
HST-80(A)	80L	1.1kw	1450	12	120	860×800×760
HST-100(A)	100L	1.5KW	1450	15	140	1150*1050*950
HST-150(B)	150L	2.2kw	1450	20	180	1170×1100×1000
HST-150(A)	150L	2.2kw	1450	20	180	1170×1100×1000
HST-200(A)	200L	2.2kw	1450	20	280	1480×1350×1100
HST-200(B)	200L	2.2kw	1450	20	280	1480×1350×1100
HST-300(A)	300L	3.7kw	1450	20	400	1480×1350×1100
HST-300(B)	300L	3.7kw	1450	20	400	1480×1350×1100
HST-400B	400L	3.7kw	1450	20	600	1480×1350×1100
HST-600(A)	600L	5.5-7.5KW	1450	20	1500	1950×1750×1450

 

 

1,before blasting and after blasting