Specifications

vibratory tumbler vibratory 600L with pnematic free noise cover and frequency control box
it's free noise .high quality

vibratory tumbling equipment 600L with pnematic free noise cover

Vibratory tumble finishing systems produce a cutting action by shaking the processing vessel (the finishing tub) at a high speed,causing the tumbling media and parts to scrub against each other. This scrubbing action precisely abrades the parts to remove burrs.
A shaft with rotating eccentric weights mounted on the tub produces the shaking action.

Vibratory deburring machines and finishing systems produce a cutting action that is very thorough.
They remove material from pockets and recesses and inside bores, which cannot be done in a barrel tumbler,
so they can be used for very delicate or intricate parts. With high speeds and a short stroke,
they can also run large bulky parts without damage. Large wing spans and landing struts are routinely run in these systems.
Vibratory finishing systems also lend themselves to be automated easily.
They can be fully automated for a flow-through operation or used as a basic batch operation.
The action is that of a small orbit at a high speed and thus is very powerful, yet causes little stress on the parts  
     
     

Model	Capacity	Motor Power	Motor speed	PU	Weight(kg)	Size(L×W×H)mm
			(r/min)	(mm)
HST-300(BC)	300L	3.7kw	1450	20	400	1480×1350×1100
HST-400(BC)	400L	3.7kw	1450	20	600	1480×1350×1100
HST-600(BC)	600L	5.5-7.5KW	1450	20	1500	1950×1750×1450

 

              

1,before blasting and after blasting

 

  

2.detail picture

 

3.Polishing media