Mi - light WiFi 2.4G 4 - Zone RF wireless touching RGB controller

With the technology of the 2.4G high frequency wireless remote control,it has the characteristics

of low power consumption,long distance transmission,and strong anti-interference ability,high

speed telecommunications,etc.The remote looks fashionable and elegant,with simple and practical

functions of color changing and brightness dimming,the capacitive touch screen design makes

the remote easy to use.

Programs:

Programs 1(RGBW Fade Out)

This program fades in and fades out the color red,green,blue and white one after anther.

Programs 2 (Color Flash)

In this program,red,green,blue,white ,yellow purple flashes to change.

Programs 3 (Disco)

Different colors strobe and flash to change.

Programs 4 (Red Color Ramp up and flash)

In this program,red color brightens from 0%-100% and shuts down,then flashes three times.

Programs 5 (Green Color Ramp up and Flash)

In this program,green color brightens from 0%-100% and shuts down,then flashes three times.

Programs 6(Blue Color Ramp up and Flash)

In this program,blue color brightens from 0%-100% and shuts down,then flashes three times.

Programs 7(Color Change+Flash)

Here several colors fade into each other and then flash randomly

Programs 8(Fade in and Fade out)

Here different colors fade into each other.

Programs 9(Strobe White)

Just white color flashes up.

TIPS:

TO dim all RGBW lights at once or change the color ,first press ‘Master ON’.To do this with

individual lights,first press‘Zone ON’.Secondly,choose the color or brightness according to

the color ring or brightness ring.

For RGB led strip light,the white is mixed from Red,Green and Blue,so the white is not pure.

For RGBW led strip light,the white is pure white.

Linking new lights to the remote controls:

1.Choose which zone you want to assign the light(1 to 4).

2.Switch off the main power supply of the light in the select zone with the main switch or pull the plug.

3.Now switch on the light again and within 3 seconds shortly press one of the ‘Zone ON’ buttons

one time on the remote control.

4.When this link operation is successful,the light slowly blinks 3 times on and off.

Unlinking the lights:

1.Check via the remote control to see which zone(1 to 4)is already linked to a lights.

2.Switch off the main power supply of the lights with the main switch or plug from the socket.

3.Now switch on the light again within 3 seconds press 5 times quickly and shortly on one the

‘Zone ON’ buttons which you wan to unlink.

4.When this unlink operation is successful,the light quickly blinks 6 times on and off.

Grouping of several lights

You can add endless number of lights to a zone on the 4 channel remote by linking the lights to

different zones.This way you are completely flexible in creating different group combinations.

below you can see some grouping examples.

We recommend using rechargeable batteries for the remote controls.

For that reason,we don’t include ordinary batteries.We hope you appreciate our environment

friendly choices and they do not cause you any inconvenience.

Attention:

1.The regular for sale is a kit(remote and controller).The user can re-programme freely as needed.One

remote can control countless controllers,but one controller can only be controlled by four remotes(Max).

2.Please check the battery installation and controller(totally discharge the power),when you

programme after switching off and switching on.

 1.Please check whether the input voltage of the constant voltage power supply is in accordance with

the controller,and please check the connection of both the controller will be broken.

2.Please don’t connect wires with power on.Please switch on again only when it is right connection

and no short circuit.

3.Please keep your finger off the touch ring when install the batteries,to improve its sensitivity,and use

the remote(3 seconds later) after the batteries are installed.Please reinstall the batteries,if the touch ring

is found low-sensitivity.

4.Please do not use the controller in the place with widely range metal wave nearby, otherwise,the remote

distance will be seriously affected.

Address: A Building ,Ming Jin Hai 1st Industrial park ZhouShi Rd Shiyan,Baoan,Shenzhen,China. PC: 518108