Product Details

DAT CLK single line and double line spi signal ic led controller T-1000

Product Description

1 . 256 Gray , Gamma correction processing software
2 . Support the rules and special-shaped handle.
3 . Controller, a port output, may bring 1024/2048 light.
4 . Off-line control, play back content stored in the SD card
5 . T-1000C store a maximum of 16 documents

Note: T-1000C-port 512 lights, the playback speed of up to 30 frames / sec, the port more than 512
lights, the frame rate with the increase in the number of lights automatically reduced.
Supported chip

Support Chips

Support Chips	LedEdit software that models	Single load number of lamp	Notes
LPD6803,D705,1101,UCS6 909,UCS691	T-1000-6803	2048 pixels
LPD8806, LPD8809	T-1000-8806	2048 pixels
TM1803,TM1804,TM1809, TM1812,UCS1903	T-1000-TM	2048 pixels	TM1804 and TM1809 of high speed
Standard DMX,HX512	T-1000-DMX	170/512 Pixel	Compatible with standard DMX512 Protocol
WS2801,WS2803, WS2811	T-1000-WS	2048 pixels
TLS3001,TLS3002,TLS30 05,TLS3008	T-1000-TLS	2048 pixels
P9813	T-1000-P9813	2048 pixels
SM16715	T-1000-SM16715	2048 pixels
SM16716	T-1000-SM16716	2048 pixels
BS0815,BS0825,BS0901	T-1000-0815	2048 pixels

System Architecture

Specific parameters
Memory Card:
Type : SD Card
Capacity : 256MB —2GB
File Format : FAT file format
Store files : *.led

Physical parameters

Weight : 0.2kg
Size : 122mm*67mm*25mm
Temperature : -20 ℃—85 ℃
Power Supply : DC 5V —24V
Power : 3W
Note :
To copy files to SD card, you must first format to the SD card, pay attention to is that each copy
must be formatted before.
SD card must be formatted as "FAT" format.

Product Pictures