The UHMW polyethylene surface has outstanding sliding properties.

Eliminates belt sagging and ensures optimum sealing with the skirting rubber. 
Integration profiles enable easy and quick mounting with special bolts.
Cushions Impact To Prevent Damage
Adjustable Supports Make Installation Easy
Eccentrics in wing supports allow outer bars five degrees of wear adjustment.

Simple impact bars are each secured with special T-Bolt. Meets stanards for all serial belt conveyor trough and return idlers. Engineered to your conveyors as the actual conditions.

Technical parameter

1,Material of surface of impact bar: UHMW  
2,Tensile strength: >25N/mm2 
3,Elongation:> 350% 
4, Impact strength: >10kJ/m2 
5, Speeling stength: UHMW and  Rubber>200N/cm 
       Rubber and aluminum frame  >200N/cm 
1,Impact rubber of impact bar 
2,Tensile strength:> 15N/mm2 
3,Elongation:>  400% 
4,Hardness:Shore A 35~40 
5,Framework of  impact  bar: Aluminum 
6,Impact  bar stand:Q235A;painting surface

Main Properties

Excellent Abrasion-resistance

Good self-lubrication and low coefficient of friction

High anti-impact strength and good toughness

Good chemical corrosion resistance can resist almost all mediums such as acid,alcli and salt,but except for concen trated sul-phuric-acid,concentrated nitric and a few organic solvents.

Inodorous,in noxious and impenetrable

Good conductibility and ultra-low water absorbability

Good anti-environmental stress breakage property which is 200 times of ordinary ethylene

Good cold resistance property which isnit brittle even if at 176°Cbeiow zero.

UHMW-PE (ultra high molecular weight polyethylene) is an extremely tough and abrasion resistant thermoplastic that is used for applications that require durability and/or abrasive wear resistance.
    UHMW plate is often used for lining chutes and hoppers in order to protect metal surfaces and promote the flow of solid materials such as sand, wood chips, or coal.

UHMW (aka UHMW-PE) (PE1000) offers a combination of excellent properties – outstanding abrasion resistance, superior impact resistance, non-sticking and self-lubricating properties and excellent mechanical properties, even in cryogenic conditions. UHMW Sheet, Rod, Tube and Profiles reduces noise from impact & vibration. It is a self-lubricating material that is chemical, corrosion, and wear-resistant. UHMW is also available in several filled grades including higher-temperature, ceramic-filled, conductive and ESd versions. 

1.         Extremely tough and durable

2.         Low friction

3.         Excellent abrasion resistance

4.         Good chemical resistance

5.         Low moisture absorption

6.         Easy to fabricate

XingXing 

conveyor is used in the loading area of the conveyor belt to replace the traditional impact idler.

 It is designed to reduce shock and stress to the belt caused by the falling down materials, avoid 

 abrasion and tear by sharp materials and prevent materials from falling and scattering.

1.Protect conveyor belt from falling materials.

2.Replaceable impact bars.

3.Abrasion-resistant UHMW.

4.Extend belt life.

Conveyor rubber impact bar for belt conveyor loading point is a fusion of three different layers:

      •UHMW  pe cap

      •Cushioning rubber or urethane

      •Alumimium insert or steel insert.

Features:

1. Avoids the damage to the belt through the contact between the bar and surface of belt. 

2. The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost. It effectively eliminates the spillage or scattering of the material caused

by inequality of the stress on the belt.

3. The UHMW polyethylene surface has outstanding sliding properties, to reduce the frictional resistance to the minimum. 

4. Ultra elastic rubber absorbs the impact in the maximum. 

5. Each part of the impact bar is closely jointed by hot vulcanization.

6.“Ttrack” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.

The impact bar is composed of ultra-high molecular weight polyethylene,rubber elastomer  and Aluminum alloy framework,each part of them is closely jointed by hot vulcanization

Technical parameter

1.Surface material of impact bar: Ultra-high molecular weight polyurethane(UHMWPE)

  1.1 Tensile Strength: > 25N/mm2

  1.2 Elongation: > 350%

  3Impact strength:10KJ/m2

  1.4Speeling strength:

  UHMW and Rubber>200N/cm

   Rubber and aluminum frame>200N/cm

2.Rubber Elastomer of impact bar

    2.1  Tensile strength:>15N/mm2

    2.2  Elongation:>400%

    2.3  Shore Hardness: 35~40A

3.Framework of impact bar: Aluminum

4.Standard length of impact bar: L=1220mm or L=1400mm

  Guide rail was designed in response to demands from the packaging and material handling industries that require exceptional frictional and resistant properties. And it provides effective protection for expensive conveyor systems, especially in wet and corrosive environments. 

We offer a wide variety of custom designed UHMW-PE chain guide that meet client specifications. Each one of them is made-to-order utilizing WM’s top of the line fabrication equipments. Those guide rails provide high abrasion, low coefficient of friction, high impact of resistance, and excellent chemical resistance. Their unique characteristics help conveying systems operate with minimal wear and extended life.

Our Other Plastic Products:

UHMW-PE Sheet; HDPE Sheet; PE Sheets;UHMW-PE/HDPE/PE Machined Parts;

Synthetic ice rink board, artificial ice rink, portable hockey training board;

UHMW-PE/HDPE Marine fender board;

UHMW-PE/HDPE Outrigger pad;

UHMW-PE/HDPE Liner board;

UHMWPE guide rail;

And other uhmwpe and hdpe products, welcome to ask!