Product Details

impact bed/ impact cradle/impact bed bar

Name: impact bed/ impact cradle/impact bed bar
Brand: XINXING
Availability: InStock

Impact Bar and Impact Bed Conveyor Belt Support System:

The impact bar is a combination of three different layers. The top layer is made of UHMWPE for smooth movement of belt, thanks to its low dynamic co-efficient of friction.

The middle layer is of rubber to cushion the impact load while the lower layer is made of aluminum, which actsas a fastening device with the main support frame or cradle.

The cradlers are custom built to suit specific applications. The installation of impact bar is made is such a way that the belt is not in touch with the bar when running empty. The belt comes in contact with the bar only when it is running under loaded condition.

Impact bars and impact bed are made up of a cast aluminium T-slotted base covered in a solid block of 60 shore hard rubber with a 10mm polyethylene(PE) top.

Impact bar is used in the loading area of the belt conveyor to replace the traditional cushion rollers. Its designed to absorb impact loading which will dramatically reduce shock and stress loading to the structure.

Specifications

Our impact cradle of belt conveyor feature:

The UHMW polyethylene surface has outstanding sliding properties.

Eliminates belt sagging and ensures optimum sealing with the skirting rubber.
Integration profiles enable easy and quick mounting with special bolts.
Cushions Impact To Prevent Damage
Adjustable Supports Make Installation Easy
Eccentrics in wing supports allow outer bars five degrees of wear adjustment.

Simple impact bars are each secured with special T-Bolt. Meets stanards for all serial belt conveyor trough and return idlers. Engineered to your conveyors as the actual conditions.

Features:
1.Avoids the damage to the belt through the contact between the bar and surface of belt.
2.The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost.
3.Effectively eliminate the spillage or scattering of the material caused by unequality of the stress on the belt.
4.The UHMW polyethylene surface has outstanding sliding properties.
5.Arc surface of polyethylene enables the conveyor belt to running smoothly.
6.Ultra elastic rubber absorb the impact in the maximum.
7.Each part of the impact bar is closely jointed by hot vulcanization. Fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.

Used in the conveyor loading points or transfer points to replace traditional cushion rollers. It’s designed to absorb impact loading and help eliminate spillage and scattering of the products. This results in less wear and tear on your conveyor system, dramatically improves the efficiency and reduces the maintenance cost.

About our company :

XINXING is the leading manufacture for Engineer plastic like UHMWPE ,HDPE ,PP ,PVC in China for nearly 20 years with the most competitive price and best quality .We can supply UHMWPE,HDPE ,PP ,PVC ,POM Sheet /rods/parts and now 70% of our production have exported to all over the world like America,Europe ,Russia ,Australia and South Asia .XINXING is the only manufacture in China that have ever cooporated with the mostforeign goverment companies.

Characters:

1. Non-Toxic and smell

2. Low coefficient of friction

3. Corrosion resistant

4. Abrasion and impact resistant

5. Anti-Weather and Anti-Aging

6. Self-lubricating

7. Wear Resistant

8. Great liner material for industrial material handling applications

9. UV Resistant/ultraviolet-resistance sheet

10. High Operating Temperature

11. High Tensile Strength

12. High Viscosity

13. Flame Retardant

14. Reprocessed

Advantages:
1. Avoids the damage to the belt through the contact between the bar and surface of belt.
2. The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost. It effectively eliminates the spillage or scattering of the material causedby inequality of the stress on the belt.

3. The UHMW polyethylene surface has outstanding sliding properties, to reduce the frictional resistance to the minimum.
4. Ultra elastic rubber absorbs the impact in the maximum.
5. Each part of the impact bar is closely jointed by hot vulcanization.
6.“T-track” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.

The impact bar is a combination of three different layers. The top layer is made of UHMWPE for smooth movement of belt, thanks to its low dynamic co-efficient of friction.

The middle layer is of rubber to cushion the impact load while the lower layer is made of aluminum, which actsas a fastening device with the main support frame or cradle. The cradlers are custom built to suit specific applications. The installation of impact bar is made is such a way that the belt is not in touch with the bar when running empty. The belt comes in contact with the bar only when it is running under loaded condition.

Technical parameter

1,Material of surface of impact bar: UHMW
2,Tensile strength: >25N/mm2
3,Elongation:> 350%
4, Impact strength: >10kJ/m2
5, Speeling stength: UHMW and Rubber>200N/cm
Rubber and aluminum frame >200N/cm
1,Impact rubber of impact bar
2,Tensile strength:> 15N/mm2
3,Elongation:> 400%
4,Hardness:Shore A 35~40
5,Framework of impact bar: Aluminum
6,Impact bar stand:Q235A;painting surface

Main Properties

Excellent Abrasion-resistance

Good self-lubrication and low coefficient of friction

High anti-impact strength and good toughness

Good chemical corrosion resistance can resist almost all mediums such as acid,alcli and salt,but except for concen trated sul-phuric-acid,concentrated nitric and a few organic solvents.

Inodorous,in noxious and impenetrable

Good conductibility and ultra-low water absorbability

Good anti-environmental stress breakage property which is 200 times of ordinary ethylene

Good cold resistance property which isnit brittle even if at 176°Cbeiow zero.

XingXing

conveyor is used in the loading area of the conveyor belt to replace the traditional impact idler.

It is designed to reduce shock and stress to the belt caused by the falling down materials, avoid

abrasion and tear by sharp materials and prevent materials from falling and scattering.

1.Protect conveyor belt from falling materials.

2.Replaceable impact bars.

3.Abrasion-resistant UHMW.

4.Extend belt life.

Conveyor rubber impact bar for belt conveyor loading point is a fusion of three different layers:

•UHMW pe cap

•Cushioning rubber or urethane

•Alumimium insert or steel insert.

Features:

1. Avoids the damage to the belt through the contact between the bar and surface of belt.

2. The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost. It effectively eliminates the spillage or scattering of the material caused

by inequality of the stress on the belt.

3. The UHMW polyethylene surface has outstanding sliding properties, to reduce the frictional resistance to the minimum.

4. Ultra elastic rubber absorbs the impact in the maximum.

5. Each part of the impact bar is closely jointed by hot vulcanization.

6.“Ttrack” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.

The impact bar is composed of ultra-high molecular weight polyethylene,rubber elastomer and Aluminum alloy framework,each part of them is closely jointed by hot vulcanization

Technical parameter

1.Surface material of impact bar: Ultra-high molecular weight polyurethane(UHMWPE)

1.1 Tensile Strength: > 25N/mm2

1.2 Elongation: > 350%

3Impact strength:10KJ/m2

1.4Speeling strength:

UHMW and Rubber>200N/cm

Rubber and aluminum frame>200N/cm

2.Rubber Elastomer of impact bar

2.1 Tensile strength:>15N/mm2

2.2 Elongation:>400%

2.3 Shore Hardness: 35~40A

3.Framework of impact bar: Aluminum

4.Standard length of impact bar: L=1220mm or L=1400mm

Guide rail was designed in response to demands from the packaging and material handling industries that require exceptional frictional and resistant properties. And it provides effective protection for expensive conveyor systems, especially in wet and corrosive environments.
We offer a wide variety of custom designed UHMW-PE chain guide that meet client specifications. Each one of them is made-to-order utilizing WM’s top of the line fabrication equipments. Those guide rails provide high abrasion, low coefficient of friction, high impact of resistance, and excellent chemical resistance. Their unique characteristics help conveying systems operate with minimal wear and extended life.

Our Services

Xinxing focus on what our customers demand and dedicate to produce satisfying productsand innovate

new types products to our customers:

In processing of products, we strictly manager our workers to pay attention to every details, asking there is no any error in products.

We have strict Quality Control(QC) in order to make sure that all details of products meet customers’ requirement.

Before delivery, we will be responsible for package all products perfectly in order to make sure there is no

anydamage of products in transportation.

In transportation, we will track the details of shipment and feedback to our customers timely and make sure our customers will receive the products on time.

After receiving products, if you have any question, we will try our best to serve you. And welcome to your more orders in the future.