KADA862D++ 4 IN 1 SMD SMT Digital Weldering Systerm, Infrared station
Negotiable /Set
Min.Order:1 Set
Guangzhou Telesailor Electronics Ltd.
AIDA858 220V SMD Rework Solder Station Hot Air Blower Heat Gun of AIDA858
SMD Rework Soldering Station of AIDA 852AD+ HOT AIR & IRON 2in1 WELDER Spares 3 Nozzles
AIDA850A++ SMD rework system and hot air gun station ,Hot Air gun with 3 pcs Nozzles
220V Dual Digital System v4.0 AIDA 952D+SMD/SMT Hot Air&Iron 2 in1 Soldering Station
AIDA SMD rework system and hot air gun station of AIDA 850 ,Hor Air Gun with 3pcs Nozzles
KADA862D++ SMD SMT Digital Weldering Systerm
Description:
Features:
1.The infrared rays of the adoption independence development dismantles the technique of soldering
2.The definite purpose infrared rays heats,the penetration force is strong,the device suffers the caloric blance,breaking the traditonal hot breeze
dismantle the soldering machine housing lives the module heating ,strong defect in bombardment in caloric.
3.The operation is easy,throught make a day of it the training can immediately complete and all modules.
4.Have no to need to dismantle the soldering cure to have ,this machine can dismantle an all modules.
5.This machine has a preheating sol system ,perheating range 120*120MM.
6.The infrared rays heats the none caloric the romantic moving,can't affect the small module in peripheral.Applicably all of module,is the module of micro BGA particularly.
7.The infrared rays heat,dismantles the flat-out the breeze of specific heat in soldering robs quick a double,because suffer the caloric failure device rate to lower consumedly.
8.Whole function LED figures display.
9.The whole function suffers the CPU control.
Specification:
1.Power Voltage: 220V AC
2.Power Consumption: 1200W (Max.)
3.Pump: Brusheless Air Gun Engine
4.Preheating Area:120*120mm
5.Leakage Voltage of Iron Tip: <0.5mV
6.Standard Iron Tip: AT-900M
7.Hot Air Temperature: 100 to 480C
8.Tip of Iron Temperature: 200 to 480C
9.Weight: 12KG
What you may need when you doing reballing?
1. Solder Flux
2. Soldering wire/desoldering wick
3. Solder ball
4. Bga Stencils
5. Bga reballing station
6. And other bga rework accessories