Name: similar to polyguard altene pipeline tape for underground piping
Brand: XUnda
Availability: InStock

Product Details

XUNDA T 600 Polyethylene bituminous tape

Specification

Product Style No.	XUNDA T 600
Storage life	24 months
Service life	More than 30 years
Storage temperature	5 C - 50 C
Main Market	Russian,Ukraine,UAE,Middle east

XUNDA T 600 Polyethylene bituminous tape for protection of pipelines from Corrosion, Tapes for waterproofing of roofs, waterproofing of foundations, for basements and underground jobs, waterproofing of swimming pools

XUNDA T 600 Polyethylene bituminous tape Used for the anti-corrosion protection of buried or immersed pipes and fittings. Applied to weld joints, bends, bare pipe lengths and pipe fittings.

XUNDA T 600 Polyethylene bituminous tape Physical Properties

XUNDA-T 6130

Physical Properties	Test Method	Typical Value
Physical Properties	Test Method	English	Metric
Total thickness	ASTM D 1000	50.0 mil	1.27 mm
Width	-	2’’- 32 ‘’	50 -800 mm
Length	-	33’ -200 ‘	10 -60 m
Backing colour	-	Black,Yellow or others
Tensile strength	ASTM D 1000	55 N/cm
Peel Adhesion to primed steel pipe	ASTM D 1000	35 N/cm
Elognation	ASTM D 1000	400%
Cathodic Disbandment	ASTM G8	0.25 in radius 6.4 mm
Dielectric Strength	ASTM D 149	42 Kv
Volume Resistivity	ASTM D 1000	1.2x1012 ohm.cm
Water Absorptivity	ASTM D 570	0.1 %
Water Vapor Transmission Rate (24h)	ASTM F1249	0.1g/100sq mm/24h
UV resistance		Excellent
Application Temperature		23℉-140℉	-5 ℃ - 60 ℃
Max Service Temperature		-4℉-176℉	- 20 ℃ - 80℃

XUNDA T 600 Polyethylene bituminous tape- Application:

Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease.Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness.

Irregular surfaces such as valves, flanges, etc. may require the use of Mastic or Profiling Mastic. Refer to the product sheets for these specific

products for information on application and selection.

Packaging & Shipping

Our Services

Q1. Can I have a sample order for pipe wrap tapes?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than one full 20 ft container.

Q3. Do you have any MOQ limit for pipe wrap tapes order?

A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for tapes?

A: Firstly let us know your thickness or the total coating thicknessSecondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order.Fourthly We arrange the production.

Q6. Is it OK to print my logo on tape product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.We can print your logo on the carton or the inner core.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 1-3 years warranty to our products according to the different products

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly, during the guarantee period, we can replace it with your new order together , but we have to get some proof to supply to our directorate