Product Details

High temperature fireproof material brown alumina oxide

Name: High temperature fireproof material brown alumina oxide
Brand: shaper
Availability: InStock

Introduction

SHAPER Material Products

with good performance indicators.

Chemical Composition

The chemical composition is the main indicators to show the material's quality and performance. Higher purity and fewer impurities are based on advanced production technology.

Hardness

Usually ,abrasive material hardness is higher, the performance

of corrosion resistance and cutting machinability will be better.

Toughness

Abrasive material need has toughness, to make sure strong cutting force, also need has brittleness, to make sure strong

self-sharpening.

Hydrophilic

Hydrophilic is an important factor decide abrasive material's binding force and influence coated abrasives produce cost and performance.

Bulk density

Bulk density is an important technological parameter,abrasive grain's density ,shape and grit distribution are decisive factors for it.bulk density is closely related on abrasive tool's formability,

strength,porosity and influence grinding performance.

Shape

Shape of abrasive grain also is a very important performance. blocky shape(sphere) is more perfect, it influences toughness,bulk density and hydrophilic. Abrasive through advanced plastic and selection processing,could obviously increase the product form content such as blocky shape grains.

Product Description

Character:

BFA has high hardness,stong self-sharpening,

excellent heat resistance.

Application:

BFA for manufacturing resin and ceramic grinding

tool,is cutting malleable cast iron,ordinary steel,

carbon steel,alloy steel and hard bronze,etc.

A powerful guarantee.

Supplying grains:

BFA is available in grits F16,..,F220;

F230,...,F3000, sized in acordance with

the current GB/FEPA sieve standards.

Other sizes are also available on request.

Chemical analysis in wt.%(of grit F60)

	Al2O3	SiO2	Fe2O3	TiO2	CaO	MgO
Typical	95.53	0.98	0.12	2.2	0.39	0.40

Grain size distribution:

Use for bonded abrasivers

Grain F12-F220 Accordanced with GB/T 2481.1 1998
Grit size	Sieve		Mesh(μm)	Range	Grit size	Sieve		Mesh(μm)	Range
F24	1	16	1180	0	F36	1	20	850	0
	2	20	850	<25		2	30	600	<25
	3	25	710	>45		3	35	500	>45
	3+4	30	600	>65		3+4	40	425	>65
	pass	35	500	<3		pass	45	355	<3
F46	1	30	600	0	F60	1	40	425	0
	2	40	425	<30		2	50	300	<30
	3	45	355	>40		3	60	250	>40
	3+4	50	300	>65		3+4	70	212	>65
	pass	60	250	<3		pass	80	180	<3
Micro powder F230-F1200 Sedimentometer Accordanced with GB/T 2481.2 2009
Grit size	D0 max (μm)	D3 max (μm)	D50 max (μm)	D95 max (μm)	Grit size	D0 max (μm)	D3 max (μm)	D50 max (μm)	D95 max (μm)
F230	120	77	55.7±3.0	38	F240	105	68	47.5±2.0	32
F280	90	60	39.5±1.5	25	F320	75	52	32.8±1.5	19
F360	60	46	26.7±1.5	14	F400	50	39	21.4±1.0	10
F500	45	34	17.1±1.0	7	F600	40	30	13.7±2.0	4.6
F800	35	26	11.0±1.0	3.5	F1000	32	23	9.1±0.8	2.4
F1200	30	20	7.6±0.5	2.4(80%)

*If you need any other data, please contact us.

Use for coated abrasivers

Grain P12-P220 Accordanced with GB/T 9258.1-9258.3 2000
Grit size	Sieve		Mesh(μm)	Range	Grit size	Sieve		Mesh(μm)	Range
P24		14	1400	0	P60		35	500	0
	+	18	1000	<1		+	45	355	<1
	+	20	850	10-18		+	50	300	10-18
	+	25	710	52-70		+	60	250	52-70
	+	30	600	>92		+	70	212	>92
	pass	30	600	<8		pass	70	212	<8
P120		70	212	0	P220		120	125	0
	+	100	150	<7		+	170	90	<2
	+	120	125	34-50		+	200	75	10-20
	+	140	106	80-92		+	230	63	52-74
	+	170	90	>96		+	270	53	>90
	pass	170	90	<8		pass	270	53	<10
Micro powder P240-P2500 Sedimentometer Accordanced with GB/T 9258.1-9258.3 2000
Grit size	D0 max (μm)	D3 max (μm)	D50 max (μm)	D95 max (μm)	Grit size	D0 max (μm)	D3 max (μm)	D50 max (μm)	D95 max (μm)
P240	100	81.7	58.5±2.0	44.5	P280	101	74.0	52.2±2.0	39.2
P320	94	66.8	46.2±1.5	34.2	P360	87	60.3	4.05±1.5	29.6
P400	81	53.9	35.0±1.5	25.2	P500	77	48.3	30.2±1.5	21.5
P600	72	43.0	25.8±1.0	18.0	P800	67	38.1	21.8±1.0	15.1
P1000	63	33.7	18.3±1.0	12.4	P1200	58	29.7	15.3±1.0	10.2
P1500	58	25.8	12.6±1.0	8.3	P2000	58	22.4	10.3±0.8	6.7
P2500	58	19.3	8.4±0.5	5.4

*If you need any other data, please contact us.

Packaging & Shipping

Bags:

25KG raw materials in a plastic woven bag or paper bag.

1000KG raw matersls or 40x25Kg bags in a big bag.

Transport Package:

About Us

Company Information:

Zhengzhou Hanhang Abrasive Company is a professional manufacturer for resin cutting and grinding wheel products and machines. We are located in Zhengzhou city , which is the origin of abrasive disc in China.

We have been engaged in researching, producing and selling abrasive disc 30 years, during this 30 years, we had insisted on Sharp! Economic! Durable! Safety!——the standard of our products.

In 1998, we designed and produced Chinese first push style automatic molding machine. during this 18 years, we insisted on researching and developing, our machines are more and more stable and effective, so we has accumulated a number of technology patents.

Our Service:

Now, we have many years experience about producing resin wheel and equipment so we can supply you best quality productions ,machines and production technology.

No matter you want to purchase resin wheels , build a new factory or already to be a manufacturer, please contact with us, we can offer you professional help and support.

We are engaged in becoming your partner for a long time.

Factory Show:

Laboratory:

FAQ

Products FAQ:

Can we use our own logo design?

-Yes, you can. Please send an email to salesman and tell more details about the logo, sticker, packing etc.

Do you have inspection procedure for: Incoming-In-Process 100% self-inspection before packing?

-Yes, we have.

What certificates do your products have?

-ISO9001

Do you have stock?