Specifications

Single Drum Horizontal Wood Fired Hot Water Boiler
1.Fuel:Rice/wheat husk,straw,wood pellet,firewood,etc
2.Features: Green

      The Product Description      

The Brief Introduction of Biomass Boilers: 

Features:

       (1). Rapid assembly, single boiler chain grate boilers;

      (2). Suited to shaped biomass burning, rich and wheat husk, wood pellet, wood                               chip, etc;

      (3). Fuel economizer placed on the back part of the boilers;

      (4). Discharged ash and slag used directly as fertilizer;

      (5). Equipped with blowing machines and induced draft fans, as well as spiral slag                 extractors;

The equipment is complete with: firepot, separator (suited to gas and solid), the recycling device for solid fuel, superheater, reheater, fuel economizer and air preheater, etc.

The Requirements for Grain Size: the coal should contain little fragments; the proportion of the grain which is less than 3mm should not exceed 30%, and the largest grain should not be over 30mm.

The Requirements for Shaped Biomass: moisture less than 15%; density: 800~1100kg/m3; the fuel piece size: 32x32x(30~80)mm, or the stick size as 30x(30~80)mm.

The Biomass Boiler is equipped with firepot, separator (suited to gas and solid), the recycling device for solid fuel, superheater, reheater, fuel economizer and air preheate, etc. 

   The Product View   

The Paramter Table of DZL Series Biomass boiler 

Item		Unit	DZL2-1.25-T	DZL4-1.25-T	DZL6-1.25-T	DZL10-1.25-T
		Model
Rated Evaporation		t/h	2	4	6	10
Rated Working Pressure		Mpa	1.25	1.25	1.25	1.25
Saturated Steam Temperature		°c	193	194	194	194
Feed Water Temperature		°c	20	20	20	20
Heating Area		m²	79	144.1	216.4	391
Grate Area		m²	2.96	6.15	7.54	13.64
Grate Thermal Efficiency		%	80.2	80.1	80.3	79.5
Grate Water Volume		m3	4.68	8.5	10.2	10.6
Excess Air Temperature		°c	163.1	134.85	135	138
Fuel			Shaped biomass fuel	Biomass fuel	Biomass grain	Biomass grain
Fuel Consumption		Kg/h	400.2	756.6	1134	1890
Outside Dimension(L*W*H)		mm	5650*2480*3452	6532*2650*3563	7420*3000*3670	8600*3780*5500
Blowing Machine	Model		4-72No3.6A	4-72No4.5A	GG6-15	GG10-15
	Air pressure	Pa	1540	2554-1673	2824	2969
	Blowing rate	m3/h	3638	5712-10562	10000	16090
	Motor power	KW	3	18.5	7.5	22
Induced Draft fans	Model		Y6-41-11No.5.4	Y5-47No6C	GY6-15	GY10-15
	Air pressure	Pa	2925	3148-2148	4116	3793
	Blowing rate	m3/h	7250	9110-16760	17517	30211
	Motor power	KW	11	7.5	37	55
Boiler Feed Pump(BFP)	Model		JGGC2.4-8*20	1.5GC-5*7	JGGC8-8*20	DG13-35*5
	Head	m	160	161	168	175
	Flow rate	m3/h	2.4	6	7.5	13
	Motor power	KW	3	7.5	7.5	18.5
Precipitator	Model		XSG-2	SM-4	Dx6	XD-10
	Drag	Pa	900	900	900	900
	Collection Efficiency	%	94	92	92	92
Slag Remover Model			SGC2	SGC4	SGC6	SGC10

    Company Information    

   Henan Yongxing Boiler Group Co., Ltd, established in 1970s with the registered capital of more than RMB 100 million, is a professional manufacturer and exporter that is concerned with the design, development and production of boilers and pressure vessels. All of our products comply strictly with the international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our company occupies an area of 230 acres, with two factories and six subsidiaries.

  Our company is bounded by Beijing-Kowloon Railway on the east, and close to 106 country road. Very convenient for transportation!

     Factory View     

The Certifications Yongxing Has Gotten  

In 2000, our company passed the accreditation of ISO9001:2000 International Quality Management System and continues to carry it on and keep it run well. On April 1^st, 2011 a new edition of this certification-ISO9001:2008 in our company and on the same day, another certification-ISO14001:2004 was passed as well. In May 2011, our company was awarded as an A-class enterprise of Henan province.

   Cooperation with Foreign Clients    

 Our Service    

   Before the products leave our factories, our company will undertake all the matters relevant to boilers such as equipment decoration in boiler room and also perfect, free-charge service will be offered by us until the turn-key project. The replacement is guaranteed if any problem concerning the product quality arises within a year.

   In the manufacturing process, clients are quite welcome to our factory to examine the actual quality and to carry out the follow-up inspection. 

    Contact Us