Good Quality 3w MR16 300Lm spotlight for indoor decorate (CE ROHS) ADS-SDW-3MR16A
Negotiable /Piece
Min.Order:20 Pieces
Shenzhen Aidisen Optoelectronic Co., Ltd.
Good Quality 3w GU10 300Lm led spotlight (CE ROHS) ADS-SDW-3GU10A
High Brightness 3w GU10 300Lm led spotlight (CE ROHS) ADS-SDW-3GU10A
5w E27 150Lm spotlight for indoor decorate(CE ROHS) ADS-SDW-5E27A
high-power 5w E27 500Lm spotlight led (CE ROHS) ADS-SDW-5E27A
CE RoHS LED Spotlights e27 7W Single Color with 2 years wanrrty
led Spotlight
Product Information
Item No.: | 3W LED Bulb |
Material: | aluminum |
Power: | 3W |
LED Quantity: | 1*3W |
Luminous Flux: | 300±5% |
Input Voltage: | AC85-265V |
LED Type | Epistar 35mil |
Color Temperature: | 2700-7000K |
Color of Light: | Warm white, Pure White, Cold white, red, green, blue |
Power factor | 0.88 |
Storage Temp | -40°c~+80°c |
Working Temperature: | -25°c~+50°c |
Lamp Holder | MR16 |
Lifespan: | 50000hours |
CRI: | Ra>82 |
Lamp Weight G.W./N.W
| 0.039kg/pcs |
Kindly note: The above data are the actual measurement by ourself, due to the difference of product, the errors of the range is ±10%
Features And Application
1.energy-conservation and environment protection,don’t contain lead, mercury and other harmful substances;
2.Long lifetime 50, 000+ hrs;
3.Low voltage operating,on the safe side,impact resistance,Lightning resistance against,
No ultraviolet and infrared;
4.high light,No stroboscopic effect , Eliminate the visual fatigue of the traditional strobe light ;
5.Wide voltage range, universal. Life and brightness is not affected by the voltage fluctuations;
6.Fast response time ,No traditional light starts flashing.
7.scope of application:For shopping malls, office buildings, hotels, exhibition hall, conference room,
hospital, shop windows, room and other places, especially for luxury decorative lighting of the high standard of space.
Product Mix
Product installation
Installation steps:
1.the glue seat and screw holder should be used the lamp holder load binder to lock.
2.The aluminum base used the screws locked on radiating lamp cup
3.The glue seat is screwed into the radiation lamp cup fixed.
4.put some glue on the pc surface then screw into the radiation lamp cup
Installation notes:
1.Before installation, check whether there is damage bulb deformation and bad appearance, such as abnormal shall not use;
2.When installed, to determine the switch is in the off state, safety first;
3.Non professional personnel do not disassemble this product;
4.Reference to the icon after installation can be used as a normal work
Luminous Intensity Distribution Diagram