Specifications

1. LED fluorescent tube
2. smd3528 led
3. high brightness, low heat
4. CE&RoHS
5. Energy saving,long lifespan

LED Fluorescen Tube light

1. SMD3528 led
2. CE&RoHS approved
3. Energy saving led light
4. Long lifespan
5. high brightness, low heat.

Item	Model number	Description	Voltage	Power	Lumen	Color temperature	Lifespan	Beam angle
1	ADS-T10-120S38-M6-7.5W-G	120pcs SMD3528 LED	AC85-265V	7.5±10%	612LM-840LM±10%	3000K-7000K	Over 50k hrs	120°
2	ADS-T10-144S38-M6-8.5W-G	144pcs SMD3528 LED	AC85-265V	8.5W±10%	735LM-1008LM±10%	3000K-7000K	Over 50k hrs	120°
3	ADS-T10-150S38-M6-9W-G	150pcs SMD3528 LED	AC85-265V	9W±10%	765LM-1050LM±10%	3000K-7000K	Over 50k hrs	120°
4	ADS-T10-240S38-1M2-15W-G	240pcs SMD3528 LED	AC85-265V	15W±10%	1224LM-1680LM±10%	3000K-7000K	Over 50k hrs	120°
5	ADS-T10-276S38-1M2-17W-G	276pcs SMD LED	AC85-265V	17W±10%	1408LM-1932LM±10%	3000K-7000K	Over 50k hrs	120°
6	ADS-T10-300S38-1M2-18.5W-G	300pcs SMD3528 LED	AC85-265V	18.5W±10%	1530LM-2100LM±10%	3000K-7000K	Over 50k hrs	120°
7	ADS-T10-330S38-1M2-20W-G	330pcs SMD3528 LED	AC85-265V	20W±10%	1881LM-2310LM±10%	3000K-7000K	Over 50k hrs	120°

 

Application:

1. Commercial lighting
2. Business office
3. Libraries, schools
4. Meeting room, supermarket
5. Corridors, home lighting etc.

 

Compare with Traditional fluorescent light:

l         LED Tube energy saving is over 80%, average lifespan is 10 times of traditional tube, no need starter and rectifier, so the LED Tube not need to be replaced frequency, maintenance free.

l         The total saved amount is equal to the cost of led tube after half an hour. LED light source is green environment LED, light pure and soft. Constant current driver. Drive fast, no strobe, No visual fatigue, protect etesight and physical health.

l         Environmental Protection-6-free low carbon green product (Mercury free, lead-free, no-ultraviolet ray and no-infrared, no-stroboscopic, noiseless )

l         Maintenance free-save the manpower and cost

l         Easy transportation-Aluminum and PC tube pipe, anti-compression and good vibration.

 

Installation:

1. Turn off the power
2. Remove the traditional fluorescent tube
3. Left up the cover of stand
4. Remove the starter and rectifier
5. Connect the two cables in the end of the stand, then connect each wire to AC
6. Cover the stand cover
7. Install the LED Tube
8. Turn on the power