Product Details

T-6705B

Digital IP Digital Amplifier IP Network adapter For IP Audio System

Product Description

The T-6705B is a wall mount network audio adapter built-in amplifier for network audio system, its distinctive features is built-in speaker line backup. One line is built-in low impedance speaker line, once this line is failure to receive network source, it will automatically switch into the backup 100V PA system to ensure the local sound system is working continuously without any interference.

It is a best seller model for IP/TCP network audio system solution. It is used to transmit program from internet to its built-in amplifier then to low impedance loudspeakers. So the normal connection way as below: Control port by RJ45 connector to LAN switch and speaker outputs to loudspeakers.

The IP network audio adapter is of wall mount design, it is built-in a 10W digital Class-D amplifier, so it is usually installed in the terminal room together with a pair low impedance speakers for a small sized application.This LAN network technology also allow this IP network audio adapter with amplifier could be installed anywhere of the LAN system, thus the cable wiring cost could be saved.

The biggest advantages of the network audio system are: Super distance audio transmission, simultaneousmaximum program task and non-dedicated network wiring. A 4 ohms loudspeaker could be directly powered by the built-in 10W power amplifier.

Model	T-6705B
Network Input	Standard RJ45x3, 1 Input, 2 Output
Protocol Support	TCP/IP, UDP, IGMP (group broadcasting)
Audio Formats	MP3/MP2
Sampling Rate	8K~48KHz
Transmit Speed	10Mbps
Audio Format	16 digit stereo CD tone
Frequency Output	20Hz~16KHz
THD	≤0.3%
S/N	≥70dB
Speaker Output Impedance And Rated Power Output	4 ohm, 10W Industrial Standard Screw terminals
Aux Line Voltage Input	2x400mV Industrial Standard Screw terminals
Sources Voltage Output	2x775mV Industrial Standard Screw terminals
Mandatory Input	0V Industrial standard screw terminals
Source Impedance Output	1
MIC Input S/N	10mV
Working Temperature	5 ℃~40℃
Working Humidity	10%~90%
Power Consumption	≤40W
Power Supply	~110V/60Hz or ~230V/50Hz
Dimensions	359x245x65mm
Weight	4.20Kg

Detailed Images

Technical Support

Well-trained sales team for sales and basic technical service.
New product promotion and seminar for all employees.
Two English spoken technician provide online after sales service.
Online system software demo and configuration is available.
30 system consultants and 10 designers to make drawing and BOQ for each tender.
Design and BOQ response to customer within 48 hours.
PDF specification sheet, system configuration template and architectural & engineer specification for documents support.
Technical documents could be downloaded from website