Product Details

IP Network PA System 350W Audio Amplifier for IP Audio System

Product Description

Suitable to be installed in Public Address System management room.

Used to play broadcasts and do paging.

Standard rack mount design and it’s in brushed aluminum case.

It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.

It’s built in DSP so that it could process information quickly and start up less than 1s.

It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP, IGMP, which achieve transmitting stereo audio in 16 bit in the network.

It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.

With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.

With 1 EMC input with highest priority.

With 1 AUX output to connect external power amplifier.

With 1 3-wire forced switching output for volume control.

Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa.

And users could write program to control the power.

With function to preset the mute depth and the background music.

Support remotely unicast.

Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.

Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.

With authorization operation management system.

Support PSTN phone broadcast and SM voice broadcast.

Support on demand unicast via Wifi and IR remote controller.

Support spare line design for power supply at DC 24V

With indicator to display status, level, protection, standby, etc.

Support PC to modify its IP address via its serial port.

This IP PA system adopts common network design so that the installation is convenient.

Standby power is less than 3W.

Specification

Model	T-6760	T-67120	T-67240	T-67350
Power Output	60W	120W	240W	350W
Speaker Output	70V, 100V & 4-16ohms
Network Input	Standard RJ45
Protocol Support	TCP/IP, UDP, IGMP
Audio Formats	MP3/MP2
Sampling Rate	8K~48KHz
Bit Rate	8K~512Kbps
Transmit Speed	10Mbps
Audio Format	16 digit stereo CD level
Frequency Response	60-18KHz(+1dB, -3dB)
THD	THD ≤ 0.1%
S/N Ratio	≥65dB
Aux Input	350mV
Mic Input	10mV
EMC input	775mV
Power Consumption	90W	180W	370W	540W
Standby Power Consumption	<3W
Protection	High temp, overload and short-circuit
Working temp	5 ℃~40℃
Humidity	20%~80%
Power Supply	~110V/60Hz or ~230V/50Hz
Dimensions	484x303x88mm		484x359x132mm
Weight	10Kg	11Kg	15Kg	16Kg

Guarantee & Warranty

ITC promise the electronics yearly failure rate is less than 1%.

ITC guarantee all electronics of 3 years quality warranty.

ITC could supply 1% wearing spare parts free of charge.

ITC guarantee all loudspeakers of 6 months quality warranty.

All of quality complaint shall be attached with serial number, failure test report and photos.

All of the quality compliant shall be feedback with a solution within 48 hours.

ITC could supply circuit diagram documents for repair.

Technical Support

Well-trained sales team for sales and basic technical service.
New product promotion and seminar for all employees.
Two English spoken technician provide online after sales service.
Online system software demo and configuration is available.
30 system consultants and 10 designers to make drawing and BOQ for each tender.
Design and BOQ response to customer within 48 hours.
PDF specification sheet, system configuration template and architectural & engineer specification for documents support.
Technical documents could be downloaded from website