8x8 hdmi matrix switcher

HDMI Audio/Video Matrix Switcher is a professional matrix switcher of high-performance embedded intelligent control.

It provides a peak data transfer rate of 3.25Gbps and perfectly supports synchronous switching of HDMI audio/video signals, adapts to7 x 24 uninterrupted work and the average time between failures is more than 30,000 hours, which provides a stable and reliable high-definition audio and video signal transmission switching hub for the system.

It is widely applied in digital video multi-screen display systems, radio and television systems,multimedia video conference, large screen display systems, high definition television teaching, visual command and control centers, medical teaching, etc.

  8x8 hdmi matrix switcher

* Input and output: Support 8-Channel HDMI Audio/Video signal input and 8-Channel HDMI Audio/Video signal output.

* Board card plug-in structure: support board card heat insertion.

* Support scalable HDMI output seamless switching function.

* Support HDCP management, can encrypt and decrypt HDCP, ensure that the signal source displaces properly.

* Support EDID management, can store 8 groups of EDID data, allow reading the output device EDID or stored and apply it to any input cards, can send EDID codes to EDID storage area via the

serial port, can read the current output EDID codes via the serial port.

* Have power-off memory function and scene memory function: have power-off site protection; can save and call 10 switching states.

* Support forward high-speed channel and embedded control signal separation switch modes.

* Support Full HD: HDPC: HDPC:1920X1200P@60_24bit, HDTV:1920X1080P@60_36bit.

* Luxury crystal buttons with luminous indicator function, the current switch information can be obtained directly from the LCD screen, easy to operate.

* Support 3D, HDMI 1.4, HDCP1.4, and DVI 1.0 protocol. Support high color depth, and up to 3.25Gbps rate.

* Have 2-Channel RS-232 communication interface.

* Have 1-way network port, can control remotely via Ethernet, support simultaneous connections up to 8 users.

* Built-in universal power supply.

8x8 hdmi matrix switcher

Front Panel

1) Power indicator light.
2) Instruction execution light.
3) A serial port to accept data light.
4) Infrared Receiver .
5) Screen.
6) Function key for switch AV / infrared/serial port at the same time. It can switch
AV/infrared/serial port from one Channel to other output channels.

7) Switch-optioned key for AV. It can switch AV signal from one channel to other output channels.
8) Switch-option key for infrared /serial port at the same time, Which can switch infrared/serial port data from one channel to other output channels.
9) Command-space key. It can separate output channel port when the output is not single channel.

10) Key for command completion. It is used to end channel option indicator .
11) Cancel key.

12) Save key. Corresponding relation of current input and output information can be saved.

13) Invoking key, invoke corresponding relation of saved input and output.

14) Shortcut key, optional key for one input channel and all output channel: Function key for
direct connection and turn-off function. Shortcut key would not need to use with “END” “ENTER” key.

15) Command key. Ensure switch option and execute switch.
16) “0,1 …8,9”: Option Key for input and output channel. Can be used for set output and input
channel of AV signal or used for opt for invoking status key or save key.

Rear Panel

17) Slot for output panel and input panel.
18) AC ~110-220V 50-60Hz power input.
19) Ground point.
20) Ethernet Interface (RJ45 main interface).
21) Serial Control Interface.