Specifications

715 insulated pipe clamps
1.ISO 9001:2008 certification
2.full range of sizes are available
3.zinc plated

For fastening:

Pipe lines to walls,cellings and floors in the sanitary and heating area.

 

Properties:

Material:	steel DD11(material no.1.0332) acc.to DIN EN 10111
Zinc plating:	electro zinc plated,6-8µm
Resistance welded nut:	M8
Resistance welded nut:	M8/10
Locking screw:	combi-slot cheese head screw
Acoustic insulation lining:	material:EPDM;chlorine-free;silicone-free
Sound insulation:	for DIN 4109
Temperature range:	-50° to +110°
Hardness:	45+-5°Shore
Fire behavior:	DIN 4102:class B2

 

Avantages:

1.It enables one-hand mounting.

2.A pipe is preassembled by mere snapping.

3.The quick-clamping system protects the clamp against uncontrollable opening after snapping.

4.Compact structural design of the clamp enables simple and full piping insulation without larger overlap in the area of the toggle and closing device. All this is possible even using a small thickness of insulating material.

5.It prevents the action of electrolysis.

6.Single-screw pipe clamps with a snap lock satisfy the highest requirements while mounting on walls, ceilings and floors but also in connection with pipes used in sanitary installations.

7.One-piece hinged pipe clamp with patented rapid locking and readjusting mechanism.

8.Compact design for close installation and easy pipe insulation.

9.Locking screw with large combination recessed slot secures against loss.

10.Pipe clamp with rubber inlay.EPDM rubber resistant to aging.

Application:

1.Used for mounting of pipes to the walls (vertical / horizontal),ceilings and floors

2.For Suspending Stationary Non-Insulated Copper Tubing Lines

3.Being fasteners for pipe lines such as heating,sanitary and waste water pipes;to walls,ceilings and floors.

4.Side screws are protected against loss during assemble with the help of plastic washers

 

Usage:

1.steel pipes

2.cast iron pipes

pper pipes

4.glass pipes

5.plastic pipes

 

Field:

1.sanitary and heating installations

2.gas distribution systems

3.air conditioning systems

 

Technical data:

 

 

Article   No.	Clamping   Range(mm)	Material(bxs)	Locking screw	Rubber(mm)
715012	12-14	20*1.5	M5*25	20*3.8
715015	15-19	20*1.5	M5*25	20*3.8
715021	21-23	20*1.5	M5*25	20*3.8
715026	26-28	20*1.5	M5*25	20*3.8
715032	32-35	20*1.5	M5*25	20*3.8
715040	40-43	20*1.5	M5*25	20*3.8
715048	48-56	20*1.5	M5*25	20*3.8
715057	57-61	20*1.5	M5*25	20*3.8
715063	63-67	20*1.5	M5*25	20*3.8
715074	74-80	20*1.5	M5*25	20*3.8
715083	83-91	20*1.5	M5*25	20*3.8

 

 

Installation: