Specifications

Pipe clamps with nut connection
1.ISO 9001:2008 certification
2.full range of sizes are available
3.electro zinc plated

 

 

 

 

 

For fastening:

Pipe lines,such as heating,sanitary and waste water pipes,to walls,ceilings and floors.

 

Properties:

Material:	steel DD11(material no.1.0332) acc.to DIN EN 10111
Zinc plating:	electro zinc plated,6-8µm
Resistance welded nut:	M8/10 1/2",H=18.0mm
Locking screw:	combi-slot cheese head screw
Acoustic insulation lining:	material:EPDM;chlorine-free;silicone-free
Sound insulation:	for DIN 4109
Temperature range:	-50° to +110°C
Hardness:	45+-5° Shore
Fire behavior:	DIN 4102:class B2

 

Advantages:

1.Two screws pipe clamp with compact structural design of the clamp enables simple and full piping insulation without larger overlap in the area of the toggle and closing device. All this is possible even using a small thickness of insulating material.

2.Screws have a combined head with a cross and a slot.

3.The pipe clamp is checked regarding noise protection according to DIN 4109.

4.It prevents the action of electrolysis.

5.Two-screw pipe clamps satisfy the highest requirements while mounting on walls, ceilings and floors but also in connection with pipes used in sanitary installations

 

Application:

1.Used for mounting of pipes to the walls (vertical / horizontal),ceilings and floors

2.For Suspending Stationary Non-Insulated Copper Tubing Lines

3.Being fasteners for pipe lines such as heating,sanitary and waste water pipes;to walls,ceilings and floors.

4.Side screws are protected against loss during assemble with the help of plastic washers

 

Usage:

1.steel pipes

2.cast iron pipes

pper pipes

4.glass pipes

5.plastic pipes

 

Field:

1.sanitary and heating installations

2.gas distribution systems

3.air conditioning systems

 

Technical data:

 

Article   Number	Pipe Dia.	Clamping range	Material	Thread	Locking     screw	Rubber         mm	PKG	Min.torque	Fzul
			b x s	G
	Inch	mm	mm				pcs/box	Nm	KN
818012	1/4"	12-14	20×1.5	M8/M10 1/2"	M5×25	20×3.8	150	80	1.2
818015	3/8"	15-19	20×1.5	M8/M10 1/2"	M5×25	20×3.8	150	80	1.2
818021	1/2"	21-23	20×1.5	M8/M10 1/2"	M5×25	20×3.8	100	80	1.2
818026	3/4"	26-28	20×1.5	M8/M10 1/2"	M5×25	20×3.8	100	80	1.2
818032	1"	32-35	20×1.5	M8/M10 1/2"	M5×25	20×3.8	100	80	1.2
818040	1 1/4"	40-43	20×1.5	M8/M10 1/2"	M5×25	20×3.8	50	80	1.2
818048	1 1/2"	48-56	20×1.5	M8/M10 1/2"	M5×25	20×3.8	50	80	1.2
818057	2"	57-61	20×1.5	M8/M10 1/2"	M5×25	20×3.8	50	80	1.2
818063		63-67	20×1.5	M8/M10 1/2"	M5×25	20×3.8	50	80	1.2
818074	2 1/2"	74-80	20×1.5	M8/M10 1/2"	M5×25	20×3.8	50	80	1.2
818083	3"	83-91	20×1.5	M8/M10 1/2"	M5×25	20×3.8	50	80	1.2
818100		100-105	23×2.0	M8/M10 1/2"	M6×30	23×3.8	25	90	1.5
818108	4"	108-114	23×2.0	M8/M10 1/2"	M6×30	23×3.8	25	90	1.5
818115		115-125	23×2.0	M8/M10 1/2"	M6×30	23×3.8	25	90	1.5
818140		135-140	23×2.0	M8/M10 1/2"	M6×30	23×3.8	25	90	1.5
818159	6"	159-169	23×2.0	M8/M10 1/2"	M6×30	23×3.8	20	90	1.5

 

 

 

 

Installation: