dmx led underwater light
USD $70 - $100 /Piece
Min.Order:1 Piece
Led Pool Light(UW1006):
Specification Parameter
Item No. | UW1005 | UW1006 | UW1007 | UW1008 |
Rate working voltage (V) | DC24V | |||
Max Power(W) | 18.7W | 21W | 21.5W | 27W |
Control way | RGB underwater light need work with 4-wire and 3-loop controller or multi function RGB controller, single color underwater light does not need work with controller and it can light up directly once connecting with power. | |||
Standard lens | 25°/45° | |||
Light source | 7*3w single color | 7*(3 in 1RGB) | 9*3w single color | 9*(3 in 1RGB) |
Standard length of connection wire | 1.5 meters | |||
IP Rank | IP68 | |||
Net Weight(kg) | 2.77 kg | |||
Shell Material | 304 stainless steel |
control method
RGB underwater light need to work with our DMX controller or 4-wire and 3-loop controller (please refer to the instructions for more information). About the 4-wire and 3-loop controller with remote, you can select 13 patterns. About DMX controller, you can set DMX address for each controller and give signal to lights to achieve brightness of R, G, B. While please note that there is a limit for the driving capacity of controller and the cable. For example, one pc DC 24V 8A controller can drive 192W (24V*8A) underwater lights for the max. While for the 27W RGB underwater light, one pc controller can drive 7pcs at most. If you want to connect more pieces lights, RGB amplifier is necessary.
Power supply
The total power of controller or amplifier multiplying by safety coefficient can get the total power of the power supply for driving the underwater lights. (If the number of power is not common number for output, then you can choose the similar number of power output for the power supply)
Installation Instruction:
Make sure the shell of power supply connect to the earth.
The controller and power supply should work in ventilated and dry environment
Please confirm that there is no short-circuit for the input and output cables. The inner parts of controller can be burnt once the light be connecting with power with short-circuit.
Marks:
The power must be turned off before installing or taking down the lamp.
Please replace with a new one if the light body is broken The underwater light can only be used underwater and the continuous time for lighting outside water can not exceed half an hour.
: