Specifications

1 led garden lights
2 single color
3 high power LEDs
4 anti-shock
5 long lifespan: 500,000 hours

 12v 3W  single color LED outdoor led garden lights   

 

  

 

Low voltage single colour Garden light 3*3W:GS2004

 

Low voltage RGB colour Garden light: 3*3W: GS2005 

 

  

 

Being adopted with internal high power LEDs, the LED garden light has many advantages, for instance, low power consumption, long lifespan (about 500,000 hours), anti-shock, environment friendly, soft colors, high illuminence etc.

 

 

The RGB color LED garden light is composed with high power Red, Green, Blue color LED chips, which can be achieved for 16,770,000 kinds of color output. Being connected by 4-pins cables and controlled by external 4 pins-3 loops controller, the light can be achieved many lighting effects, for example, synchronous 7 colors changing gradually, continuous changing etc.

  

 

With waterproof grade IP65 and working temprature of -20°C~45°C, the garden light can be endurable the temprature & humidity difference, and the garden light can be used extensively in decoration of the buildings, cultural place, park, amusement park and so on.

  

 

 

  

 

 

1. The low voltage single color garden light adopts bus connection way, it turns to bright when power on.

 

 

 

1.Distance between first lamp and power supply, and between each lamp should not over 5 meter.

2.Length of power line should not over 100 meter.

3. Max quantity of 3*1w garden light to a power line is 20 pcs, 3*3w garden light 10pcs.

4.The conductor cross section area of power-line should more than 1.0 mm²

 

 

 

2.The high voltage single color garden light also adopts bus connection way, it turns to bright when power on.

 

 

3.­­ The connection way of Low voltage RGB Garden light

 

Method 1: Main control by DMX controller, the conductor cross-sectional area of the 4-pin T wire should be larger than 1.0 square millimeters.

 

 

Method 2: Control by remote controller, the conductor cross-sectional area of the 4-pin T wire should be larger than 1.0 square millimeters.

 

 

 

  

 

 

The RGB LED garden light is controlled by simple DMX controller or 4-pin-3-loop controller ( please find the specific operation steps in the specification sheet.).

 

The 4-pin-3-loop controller has a remote, by which you can choose13 kinds of lighting effects. By setting the address of the controller, the remote also can receive the 3 DMX channel signal, which are to adjust the brightness of the light.

 

Please pay attention to the driver capacity of the controller, to take 12V 10A controller for RGB lights, the maximum load is 120W 9=12V*10A), for example: for 9w(3*3w) RGB garden light (max power), only 13pcs can be contolled by one controller (120/9≈13), If more LED garden lights need to be connected, the RGB amplifier should be connected in the front of the last garden light, which is the maximum load in 1 piece bus line.

 

Option of the power supply

 

The total power of all the connected lights should be multiplied by 1.35, then the data you get is the power of the power supply you need. (If the result is not a normal output, please choose a close power supply)

 

•  Please consider about” the working condition”, the lamp can not be put in water for long time.
•  Make sure the single-core conductor cross-sectional area of the T wire is bigger than 1.0square millimeter.

 

 Indoor and outdoor are available      

  

 

1  Please do not connect the power when the lights are in package

2  Please do not connect the power supply before installation, and ensure the device is completely connected into the ground

3 Please replace any cracked protective cover;

4 Please attention to fire prevention, electricity and vibration;

5 Please read the instructions carefully before installation, and keep it for future reference.

 

 

Corrosive or solubility chemicals will damage of the protective shell of lights;

 

The working temperature is -20°C~45°C,and humidity is 0~95%. The lifetime will be adversely affected when beyond this scope. Storage temperature:-35~70°C;

 

Please advise that we are not responsible for the effect when the components not from ILLUSION adopted.

 

 

1 Please make sure that the cover of the power supply is connected to the earth wire.

2 Please make sue the waterproof function of per output cable of the lamp is pretty good.

3 The power supplier should be installed at a ventilated and dry place.

4  Please make sure there is no short circuit before turn on the power, otherwise the parts of the device would be burn out.

5 Around the lamp should fill with some gravel or sand when installation, it is better for the heat rink and drainage. And make sure there is no corrosive, inflammability and explosive material around.

 

 

Note: A. Make sure the power is be turned off while installation or dismounting.

          B. Please replace with new lamp when the lamp body is defected.

 

1. Please check if power supply is connected, or if the switch is in the connected position when the light is not lit.

2. Please check the power connection when the lights do not work well;

 

Attention:If the lights still can not work well after trying the methods above, pls contact with professional maintenance staff to repair, and do not dismantle yourself.

 

 

1 Please feel free to contact the supplier for more information about products, such aswarranty, using environmental considerations as so on. Please kindly understand we won't inform if something changed. 2 Any other questions about this manual, Please consult qualified engineer