Specifications

GCL
Geosynthetic Clay Liners
width:1-6m
weight:4000g,4300g,4500g,4800g,5000g.

                            

 

Geosynthetic Clay Liners (GCL)
width:1-6m
weight:4000g,4300g,4500g,4800g,5000g.

 

Geosynthetic Clay Liners (GCL's) are composites that combine geotextile outer layers with a core of low-permeability sodium bentonite clay. Bentonite is a natural sealant, which actuates (hydrates) on contact with water. GCL's are used as a replacement for compacted clay liners. Upon hydration, the bentonite in the GCL swells to form a low permeability clay liner with a hydraulic conductiivity of less than 5 x 10^-9 cm/sec. As a result, GCL's can provide approximately the same hydraulic protection as one metre of compacted clay.

A GCL is a good choice as one of the components of a composite liner system in landfills or other critical containment systems. The GCL can reduce, and in some cases replace, the thick compacted clay liner normally required. Replacing this thick clay layer results in increased airspace; additional capacity that results in increased income for landfill operators. GCL’s are also good for seepage control in water containment, or in lightly contaminated water containment applications. GCL’s must be backfilled to provide confinement pressure in order to develop their full potential for impermeability.

 

Physical Performance:

Testing Item	Testing Methods	Technical Indexes
Expansion Coefficient	ASTM  D  5890	≥27ml/2g
Fluid Loss	ASTM  D  5891	≤18ml
Bentonite quality in Unit area	ASTM  D  5993	≥4.8kg/m2
Tension Strength	ASTM  D  4632	≥400N
Peeling Strength	ASTM  D  4632	≥75N
Indicating flow	ASTM  D  5887	≤1*10-8m3/m2/sec
Penetrability	ASTM  D  5887	≤5*10-9cm/sec
Tension Strength after Wetting	ASTM  D  5321	≥24Kpa typical