CELL DRAIN
USD $4 - $10 /Square Meter
Min.Order:1000 Square Meters
Feicheng Jiahua Engineering Materials Co., Ltd.
Cell Drain,Drainage Cell
Product Description
Drainage Board is molded by PP with high strength, the compressive strength is extremely high and does not distort or burst. Covering the board with non-woven fabrics gains higher water permeability and tonnage. Construction is simple and fast with security.Its specification is 40*40cm. A drainage cage can be fixed by four pieces of boards and two braces, used in water drainage under earth, wall drainage and other large area draining water.
Features
Material: HDPE, PP
Specification: Drainage Board 40*40cm; Drainage Cage 40*40*46cm
Color: Black, orange
Water percolation aperture: 18mm
Open porosity level: ≤60%
Product Use
Transportation work: river diversion and drainage on roadbed and surface of highway and railway; Draining in dyke and flow backwards layer.
Social Project:ground water and surface water drainage in roadbed, tunnel underground and waste landfill site
Building engineering:river diversion and drainage in building foundation, basement, roof, and lagging.
Virescence use:used in Garage roof Virescence, roof garden, court and bathhouse, etc
For further information,pls contact me directly.
Sub-surface Modular Drainage Cell Description
Sub-surface Modular Drainage Cell is a lightweight three dimensional geo-composite used for subsurface water management. The drainage cell polypropylene core is moulded into a unique profile and then wrapped in a filtration geotextile which then provides a complete void space for the water to travel horizontally without any obstruction. It is lightweight, high compressive strength makes the product ideal for roof garden & podium landscaping, retaining walls., sports fields &golf courses, under drains for slabs and foundations and subsurface drainage for permeable driveways and car parks.
Sub-surface Modular Drainage Cell Features
Light weight and efficient to install
Low construction cost and simple maintenance
100% Recycling
Sub-surface Modular Drainage Cell Application
Products Name: | Drainage Cell |
Item No: | JH-30 |
Size: | 500*500*30mm ,330X330X30mm,or size according to your need |
Material: | HDPE(high density polyethylene) and Polypropylene |
Thickness: | 30mm |
Tensile loading: | >1000kpa |
Drain capacity: | 25----30cm³/s |
Storing capacity | 2.6----4.0l/m² |
Surface Void Area : | >67% |
Internal Void Area | >95% |
Biological/Chemical Resistance | Unaffected by moulds and algae and good resistance to oils ,acids ,alkalis and bitumen |
Service Temperature | -20°C to 120°C |