Specifications

HDPE / PP Uniaxial (UX) Geogrids
1)Materials:PP or HDPE geogrid
2) HDPE Tensile strength:25 ~ 200kn/m

 

 

Uniaxial (UX) Geogrids with CE Certificate

Tensile Strength:20kn-300kn

Roll width:1-3m

Roll lenth:50m/roll

In grade separation applications, Uniaxial Geogrids are used to help soils stand at virtually any desired angle; from 0 to 90 degrees. Geogrids can be combined with a wide variety of facing elements in retaining wall and slope applications to produce the desired structural or aesthetic conditions for any project.

Geogrid Reinforced Soil Retaining Walls
Geogrid reinforced soil retaining walls offer economical and aesthetically pleasing alternatives to conventional retaining wall systems. The geogrid reinforced fill zone behind the wall facing acts as a uniform mass or block, providing stability to the wall and structure. Geogrids work with a wide variety of fill materials and facing elements including segmental concrete blocks, concrete panels, geogrid wraps, timbers or boulders.

Geogrid Reinforced Slopes
Geogrid reinforced slopes provide a natural and economical alternative to conventional concrete retaining walls. Geogrid reinforced slopes create naturally finished slope structures that are easy to construct and enhance property values because of their natural beauty. Geogrid reinforced slopes can be built at any angle to provide the most economical use of available space while avoiding the increased cost of vertical structures.

The construction of embankments, bridge approach fills, dikes and causeways over soft soils and wetlands traditionally involves expensive, time consuming construction methods. Geogrid reinforcement of these structures minimizes the project footprint, fill requirements and differential settlement, saving time and money.

 

PP Uniaxial Geogrid Specification           Spec                           Item          TGDG25 TGDG35 TGDG50 TGDG80 TGDG110 TGDG120 TGDG130 TGDG150 TGDG180 TGDG200 Width(m) 1-3m Tensile yield per linear meter(≥KN/m) 25 35 50 80 110 120 130 150 180 200 Tensile stretch(≤%) 10 Drawing force in 2% tensile stretch(≥KN/m) 7 10 12 26 32 38 54 62 75 85 Drawing force in 5% tensile stretch(≥KN/m) 14 20 28 48 64 74 94 110 130 145 Remark Other specifications can be produced according to customer’s need.   PE Uniaxial Geogrid Specification         Spec                           Item          TGDG25 TGDG35 TGDG50 TGDG65 TGDG80 TGDG90 TGDG110 TGDG130 TGDG150 Width(m) 1-3m Tensile yield per linear meter(≥KN/m) 25 35 50 65 80 90 110 130 150 Tensile stretch(≤%) 12 Drawing force in 2% tensile stretch(≥KN/m) 6 9 10 16.1 23 23.7 30 39 45 Drawing force in 5% tensile stretch(≥KN/m) 12 18 25 30.9 44 45.2 60 77 92 Remark Othere specifications can be produced according to customer’s need

 

 

For other further informatin,pls contact me directly.