Product Details

Specifications

1. Thickness:0.3-0.7mm
2. Strength: Q235-345Mpa
3. Material: galvanized or pre-painted steel sheet
4. Speed:1-15m/min

Double layer roof panel roll forming machine

It can produce two different shapes within one machine, profile depends on customer.

1. Machine layout

2. Main parameter

Material spec:	Color steel sheet;
Thickness:	0.3 mm to 0.7 mm
Coil width:	depends
Working speed:	0-3m/min. (Nodal distance at 250mm)
Cutting tolerance:	±2mm
Main motor power:	4Kw
Hydraulic station power:	3Kw
Decoiler	manual decoiler, max capacity 5000kgs
Main roller qty:	about 16 stands but depends on last design
Type of cutting:	Roll-formed and length-set cutting
Main body dimension:	About 7800mm1500mm1500mm

3. Machine picture

4. Working flow

Decoiling the sheet------Sheet guiding------Roll forming ------Measure length------Cutting the panel------Panels to the supporter

5. Standard equipment of machine

5tons passive uncoiler	1set
Pre-cutting equipment(Optional)	1set
Film covering device (Optional)	1set
Guiding Equipment	1set
Roll Forming Equipment	1set
Post Cut Equipment	1set
Hydraulic Station	1set
PLC Control Penal	1set
Supporter Table	2sets