roof panel roll forming machine for bending machine
USD $16,000 - $18,000 /Set
Min.Order:1 Set
Hangzhou Willing International Co., Ltd.
Roof Panel Roll Forming Machine Crimping Machine
Specification Sheet
(Pls kindly note: we can make different cold steel roll forming machines according to your demand)
Original profile to be pressed:
Machine pic:
Components of the Machine:
The roll forming machine includes manual uncoiler unit, sheet guiding equipment, roll forming system, cutting equipment, hydraulic station, electric controlling system and run out supporting table.
Technical Parameters:
Roller Material | High grade No.45 forged steel, Coated with hard chrome |
Active Shaft Material | High grade No.45 carbon wrought steel diameter 75mm |
Electric Elements | PLC control panel, Mitsubishi brand transducer. Other elements from famous suppliers in China |
Cutter blade | Cr12 mould steel with quenched treatment |
Component and Function
Coil Feeding Equipment:
Consists of one uncoiler with capacity of 5000kgs and its base. The steel sheet is manually fed to the guiding equipment under the function of friction and traction
Guiding Equipment:
Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.
Mainframe Transmission:
Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.
Roll Forming System:
The main frame of machine is welded separately and the outside wall is connected by screw after being rotoblasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool.
Post Cut Equipment:
The length and blocks can be set by the buyer through the control panel, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting.
Hydraulic Station:
Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.
PLC Control Panel:
The electric controlling system of this machine consists of five parts: operating system, screen, PLC, transducer and strong electricity part. The controlling system of this machine are imported from Mitsubishi company of Japan. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosen operation by manual or automatically.
Supporter Table:
To support the finished panels. The quantity we supply is 2 sets with length 1000mm, it can support panels with more than 2000mm at normal condition.
Working Flow
decoiling → guiding and feeding →roll forming→length cutting→run out table
Standard Equipment of Machine
5 T Manual Uncoiler | 1 Set |
Guiding Equipment | 1 Set |
Roll Forming Equipment | 1 Set |
Post Cut Equipment | 1 Set |
Hydraulic Station | 1 Set |
PLC Control Panel | 1 Set |
Supporter Table | 2 Pcs |