Product Details

Specifications

1.Used for mirror adjusters,headlamp adjusters and vehicle door locks
2.High torque,long life,light weight,small dissipation

12V dc Motor for car FT-140A,

1.Used for mirror adjusters,headlamp adjusters and vehicle door locks
2.High torque,long life,light weight,small dissipation

The models we list below are part of our existing designs. We offer specific motor design for every customer.

FT-140A

Model No.	Main Performance
	Rated Voltage	No Load		At Maximum Efficiency					At Stall
	Rated Voltage	Speed	Current	Speed	Current	Torque	Output	Eff.	Current	Torque
	V	r/min	A	r/min	A	g.cm	W	%	A	g.cm
FT-140SA-11275	12.0 CONST	10,200	0.05	8,307	0.22	18.6	1.58	60.2	0.96	100
FT-140SA-12240	12.0 CONST	11,500	0.072	9,305	0.31	26.7	2.55	69.5	1.3	140
FT-140SA-10350	12.0 CONST	8,200	0.045	6,475	0.17	16.8	1.12	55.5	0.63	80
FT-140SA-10385	13.5 CONST	8,070	0.041	6,441	0.16	20.2	1.34	61.1	0.64	100
FT-140RA-11305	12.0 CONST	14,000	0.059	11,145	0.23	12.2	1.4	50.8	0.9	60
FT-140RA-09480	12.0 CONST	8,600	0.03	6,583	0.1	11.7	0.79	67.4	0.32	50

Unit Conversion: 1g.cm---0.098mN.m≈0.014oz.in 1mm=0.039in 1g=0.035oz

Side mirror actuator motor
Headlight cleaning motor
Dimension: dia. 20.4 x 15.4 Thk. x 25 L. shaft O.D. 2.0 mm
Basic Structure: SECD housing / Plastic end cap / Female Terminal
Application: Side Mirror
Weight: Approx. 20g

Basic Structure of Chengfang Motors

Customized Options

·2-pole stator
·Sr ferrite permanent magnet
·3, 5, 7, 8, 9, 12,16 slots armature
·Silicon-steel lamination with epoxy coating
·High-carbon steel shaft
·Cu-Ag alloy commutator
·Copper-graphite brushes
·Be-Cu leaf-brush commutating system
·SECD round / flat type housing
·SECD end cap / glassfiber reinforced PA6/6 end cap
·Cylinder / self-aligning Cu-Fe alloy sintered bushes
·155oC (class F) magnet wire

·Leadwires with connector / pins
·EMI suppression components
·PTC or thermostate protection
·Built-in AC/DC rectifier
·Built-in cooling fan
·Multiple output shaft
·diamond knurls, straight knurls, D-cut, stepped shaft
·Shaft-mounted gears, eccentric gears, belt pulleys
·Stainless steel (SS304, SS420) shaft
·Ball bearing
·Cage-brush commutating system
·Precious metal brush / commutator
·Hall encoder
·Low-cogging torque design
·180oC (class H), 200oC (class C) magnet wire
·-40oC ~ 220oC bearing lubricant
·Neodymium magnets