Specifications

Coating Thickness Gauge
1. Measurement Range: 0-6000um
2. Accuracy: (1%~3%)H+1um

HST200A Coating Thickness Gauge

 

Measurement Range: 0-6000um

Accuracy:±[(1%~3%)H+1um]  Note: H is thickness reading

Powers down after 60 seconds of no activity.

 

Operation Guide:

 

1.    Power-on and Warm-up

Keystroke once;Wait until  READY! is displayed on the LCD. Now the gauge is ready for measurements.

 

2.    Zeroing

Keystroke twice; when BASE ZERO is displayed, place flat on Fe or Al base; hold steady. After measurement is obtained, DONE is shown and gauge beeps. Then lift gauge.

Note: Please conduct zeroing process after changing base. Zeroing process could be repeated for better results.

 

3.    Unit Change

Keystroke three times; convert from ums to mils or vice versa.

 

4.    Reset

Keystroke four times,Wait until  RESET  is displayed; after gauge resets, users can conduct zeroing process if necessary.

 

Materials

Gauge    Reference Fe and Al Base

Certified Plastic Shim   Battery etc.

 

 

 certificate: