Specifications

1. Short drying time
2. Easy to operate, labor intensity is low
3. Easy to clean
4. GMP
5. High efficiency

1. General description of Non-dairy creamer spray dryer:

YPG Pressure Spray Dryer is widely used in producing non-dairy creamer powder. The designing of non-dairy creamer spray dryer is as follows:

1. Drying system type: Open circulation type
2. Feeding type: Screw pump (regulated by inverter)
3. Hot air contact way: Parallel flow
4. Heating source: Steam/ Steam + electricity/ Thermal oil/ Hot air furnace (gas, oil, coal, etc)
5. Product collecting type: Two degrees cyclone separator (Collecting level>98%)
6. Atomizing type: Pressure type
7. Control system: Touch screen & PLC
8. Air filter system: Pre, middle and sub-high efficient filter (100,000 degree)
9. Discharging system: Cool air (dehumidifying) cooling collecting

 

Following is a picture of the spray dryer that we sold to Indonesia to produce non-dairy creamer . 

 

2. General description of YPG Pressure Spray Dryer:

Spray dryer is suitable for solution, suspension, slurry, paste material, etc. Liquid material is atomized to small fog drops. And fog drops contact with hot air directly in the drying tower. Moisture content is evaporated instantly. So spray dryer features high efficiency, high mass transfer area, and short drying time, in general it is 5~30 seconds. Operating temperature can be adjusted according to actual situation, in general inlet air temperature is 150~500°C. And its automation control degree is control, environment solution environment can be solved.

 

 

 

 

     3. Features of YPG Pressure Spray Dryer:

1. Quick drying speed, the surface area of material liquid through atomizing is increased greatly. In hot air stream, 95%~98% of moisture can be evaporated at moment. Particularly suitable to finish drying thermal sensitive material.
2. The product made by the machine has good uniformity, fluidity, solubility, high purity, and high quality.
3. The productive process is simple and the operation control is very convenient. For liquid containing is 40%~60% (for special material, may be 90%), it can be dried to powder product through drying one time. After dried, it is not necessary to crush and sieve. So it reduces productive procedure and raises the purity of product. For the size, bulk density and moisture of product can be adjusted within certain scope through changing operation condition. The control and management are very convenient.

 

4.    Application of YPG Pressure Spray Dryer:

Foodstuff industry: Protein, milk powder, egg powder, blood powder, tea powder, soy sauce flavor, yeast, fruit powder, vegetable powder, collagen, non-diary creamer, acacia gum, carrageenan, mushroom powder, chicken power, Chinese herbal extract, etc

Ceramic industry: Alumina, zirconia, magnesium oxide, titanium oxide, magnesium titanate, pottery clay, china clay,

Chemical industry: Dispersed dyestuff, active dyestuff, organic catalyst, white carbon black, detergent powder, zinc sulfate, silicon dioxide, sodium metasilicate, potassium fluoride, calcium carbonate, potassium sulfate, and all kinds of waste liquid, etc.

 

 

5. Technical parameters of YPG Pressure Spray Dryer

Model Item		YPG-25	YPG-50	YPG-100	YPG-150	YPG-200	YPG-300	YPG-500	YPG-1000~2000
Water evaporation(kg/h)		25	50	100	150	200	300	500	According to actual situation
Diaphragm pump	Power (Kw)	0.35	4	7.5	11	15	22	30
	Pressure (Mpa)	It can be regulated from 0.6-5. In general, it is 1-3								According to actual situation
Heating source		Electricity	Electricity + steam		Hot air furnace
Diameter of tower (mm)		1300	1800	2400	2600	2800	3200	3800	According to actual situation
Height (mm)		7800	9200	11600	14000	15300	17100	19000

 

 

6. Following are pictures of our YPG Pressure Spray Dryer:

 

 

 

 

 

 

 

Following is a small YPG Pressure Spray Dryer