Specifications

Double cone vacuum dryer:
1. Easy to operate
2. Easy to clean
3. GMP

 Description of Double Cone Vacuum Dryer
SZG Double Conical Revolving Vacuum Dryer is double conical rotating cylinder. Under the state of vacuum in the cylinder, pass oil or hot water into the jacket to heat. The heat will be connected with damp raw material through inner wall. The evaporated steam after the raw material absorbed heat will be exhausted through vacuum pump. Because the inner of cylinder is in vacuum state and the cylinder make raw material turn over from up to down and from inner to outer, the drying speed is fastened and the drying efficiency is raised, and the purpose of uniform dry can be reached, It is in conformity with the GMP requirement.

Features of Double Cone Vacuum Dryer
1.Due to the vacuum drying, the speed rate is higher under low temperature, it can triple the normal speed, so the energy saving and high heat efficiency can be achieved .This machine is most suitable for heat sensitive materials and materials that are easy to oxidize.
2.The equipment adapt advance design, the inner structure is simple, clean easy, material can be taken out entirely, and operate simple.
3.The dryer is sealed, the product doesn't lead, damage and pollute This machine is suitable for drying stimulating and poisonous materials.
Because the materials are dried by mixing drying, the product can has very low water content (≤0.5%) and good uniformity. It can meet different materials' requirements.
4.The machine has a very compact structure, and it covers a small area. so it's easy to achieve labor intensity-reducing and labor-saving due to the simple operation.
5.Users can choose stepless regulating-speed(1-10r/m)or regulating- speed (6-10rpm)

 

	100	350	500	750	1000	1500	2000	3500	4500
volume inside the tank(L)	100	350	500	750	1000	1500	2000	3500	4500
loading capacity(L)	≤50	≤175	≤250	≤375	≤500	≤750	≤1000	≤1750	≤2250
rotating speed(rpm)	3~13
power of motor(kw)	0.75	1.1	1.5	2	3	3	4	5.5	7.5
occupied area L×W(mm)	2160×800	2260×800	2350×800	2560×1000	2860×1300	3060×1300	3260×1400	3760×1800	3960×2000
rotating height(h)	1750	2100	2250	2490	2800	2940	2990	3490	4100
design pressure inside the tank(MPa)	-0.1~0.15
design pressure of jacket(MPa)	≤0.3
working temperature(°C)	inside the tank≤85 jacket≤140
pump type and power when t condenser is not used(kw)	2X-15A 2kw	2X-15A 2kw	2X-30A 3kw	2X-30A 3kw	2X-70A 5.5kw	JZJX300-8 7kw	JZJX300-4 9.5kw	JZJX600-8 11kw	JZJX600-4 20.5kw
power when t condenser is  used(kw)	SK-0.4 1.5kw	SK-0.4 1.5kw	SK-0.8 2.2kw	SK-2.7B 4kw	SK-2.7B 4KW	SK-3 5.5KW	SK-6 11KW	SK-6 11KW	SK-9 15KW
weight(kg)	800	1100	1200	1500	2800	3300	3600	6400	7500

 

note:For raw material, if its volume has great change before and after dry,then its filling cofficient may be increased or decreaded.