1710-2690MHz Dual Slant X-Polarized Remote Electrical Downtilt(RET)Base Station outdoor panel antenna
Negotiable /Piece
Min.Order:10 Pieces
Shenzhen Ameison Communication Equipment Co., Ltd.
1710-2690MHz Dual Slant X-Polarized Remote Electrical Downtilt(RET)Base Station outdoor panel antenna
AMET-1727QX6518-DE10
Application:
WCDMA/DCS/PCS/PHS/3G/4G/WLAN/LTE system
Wireless communication and datatransmission system
AMET-1727QX6518-DE10 Electrical Specifications | ||||
Frequency range(MHz) | 1710-2690 | 1710-2690 | 1710-2690 | 1710-2690 |
Polarization | ±45º | ±45º | ±45º | ±45º |
Gain(dBi) | 17.5 | 18 | 17.5 | 18 |
half-power beam width(°) | Hor:65 Vor:7.5 | Hor:62 Vor: 7 | Hor:65 Vor:7.5 | Hor:62 Vor: 7 |
Electrical downtilt(°) | 0~10 | 0~10 | 0~10 | 0~10 |
Front-to-back ratio(dB) | ≥25 | |||
Input Impedance(Ω) | 50 | |||
VSWR | ≤1.5 | |||
Intermodulation IM3(dBm) | ≤ -107 | |||
Isolation between ports | ≥28dB | |||
Cross-polar ratio | ≥15dB@0º ≥10dB@+/-60º | |||
Sidelobe suppression for first sidelobe above horizon | ≥16 dB | |||
Maximum input power(W) | 350 | |||
Lightning protection | DC Ground | |||
Mechanical Specifications | ||||
Input connector type | 8×7/16DIN female | |||
Connector position | Bottom | |||
Dimensions-mm (mm) | 2760×310×140 | |||
Packing size(mm) | 3300×320×200 | |||
Antenna weight (Kg) | 22.5 | |||
Packing weight (Kg) | 30 | |||
Radome material | UPVC | |||
Mechanical tilt(°) | 0~10 | |||
Operating temperature(°c) | -40~60 | |||
Rated Wind Velocity(m/s) | 60 | |||
Mounting hardware(mm) | 50~115 |
Cross Polarized - X-Pol
This features two independent antennas with cross polarization.This feature doubles the wireless capacity over the same channels.The antenna is fed via two N-Female ports, one for +45° polarized and one for -45° polarized signals.
This feature makes these antennas ideal for polarization diversity systems.
Remote Electrial Tilt (RET) Components:
3G mobile systems based on CDMA technology have the "breathing effort" which requires more frequent adjustment of the antenna tilt angle than that of the 2G systems, to meet the periodic variance of the traffic.
Ameison has provided the full series of the Remote Electrical Tilt (RET) solutions, including the RET antennas, Antenna Control Unit (ACU), Portable Control Unit (PCU), Smart Bias Tee (SBT) and control cables, etc. They are fully interoperationabe with AISG V2.0 compliant RRU and Node-B, etc.
The tilt angle of the antenna can be accurately checked and adjusted remotely from the OMC center without climbing up the tower and shutting down the RF power, greatly reducing the workload of the network optimization.
Remote Electrical Tilt (RET) antenna systems are designed so that wireless providers can make adjustments remotely to their antenna systems.
The Antenna Interface Standards Group (AISG) has created specifications for the control interface for these types of systems.
Tips: Remote Control Unit(RCU) and AISG 2.0 connector 50M or longer 141 RET control cable can be matched if needed, manual adjustment or optional ACU for RET control.
With our RET system, operators can optimize their beam through tighter RF containment, precise pattern control, intermodulation suppression and real-time flexibility.
Our RET system enables you to make antenna adjustments from the office without costly site visits, tower climbs or network downtime.
Because you can improve network optimization in minutes — and in any weather — you can deliver better call quality and enjoy a higher level of customer satisfaction.
--Respond quickly to changing traffic needs
--Experience higher tilt possibility compared to mechanical tilt
--Reduces human error with accurate mechanical control
--No specialized manpower or equipment needed
--Ideal for isolated or difficult-to-access sites
Ameison's Base Station Antenna Series have covered the 790-2600MHz which containsall main-stream 2G/3G/4G mobile communication system, including GSM900, DCS1800,PCS1900,UMTS2100,TD-SCDMA and LTE2600, etc.
Our experienced international development team has successfully developed hundreds of high qualitied wideband, multi-band, electrical tilt and smart antennas, based on the highest technical standards and the strictest application environment grades in the industry, by using the advantage electromagnetic and mechanical simulation software, like Ansoft HFSS, CST Microwave Studio and Solidworks, etc.
All Ameison base station antennas are 100 percent production tested in an anechoic chamber for VSWR and IM for consistent, trouble-free performance in the field.
Each dual polarized antenna is also tested for isolation.
Attention Please!!(To our all distinguished guests)
Our company has never officially authorized any party through the Internet or B2B online website to sale "AMEISON®" brand products, also without any cooperation relationship.
Where there are counterfeit our products sales and our samples room pictures, all is cheating, our company will reserve the right to shall be investigated according to law.
In order to share our good products and services and may also take the appropriate measures to avoid incurring losses, please directly visit our official company website or contact our sales team via real time Video Monitoring System to distinguish the truth and falsity for your specific requests.
Good Reputation and Credibility of A Good Guarantee
First business is a trial order, opportunity and luck, permanent commercial intercourse depends on price, quality and prestige.
Long-term business cooperation is our ultimate goal, making high quality products and considerate service is our top priority.
your choice + our products > win-win situation
We are a manufacturer, NOT trading company.
Per our factory always tell our customers all along: you win, Ameison factory will win, we do win-win long-term business, NOT one-shot deal.
We welcome you to schedule a visit our factory anytime and consult with us for more business when you feel free.