Comprehensive Products, buy 2.4GHz outdoor MIMO Antenna for Wi-Fi system on China Suppliers Mobile

Product Details

Specifications

High gain;
Full day working;
Optimized dimension;
Vertical or horizontal;
Wi-Fi system;Factory Price

2.4GHz MIMO Antenna for Wi-Fi system Product Specifications:

Feature:

High gain;
Full day working;
Optimized dimension;
Vertical or horizontal polarization.

Application:

2.4GHz WLAN system;
2.4GHz ISM band;
Public wireless hot spot coverage;
Wi-Fi system.

AMXW-2425VH-D11L65 Electrical Specifications
Frequency range(MHz)	2400~2500
Polarization	Vertical and Horizontal
Gain(dBi)	2×11
Half-power beam width(°)	H: 65 V: 33
Front-to-back ratio(dB)	≥25
Input Impedance(Ω)	50
V.S.W.R	≤1.5
Isolation between ports	≥28dB
Cross-polar ratio	≥15dB@0º ≥10dB@+/-60º
Sidelobe suppression for first sidelobe above horizon	15 dB
Maximum input power(W)	200
Lightning protection	DC Ground
Mechanical Specifications
Input connector type	2-N Female
Dimensions-mm (Height/Width/Depth)	22012225
Packing size(mm)	26016090
Antenna weight (kg)	0.37
Radome material	ABS
Radome color	White
Mechanical tilt(°)	0~10
Operating temperature(°c)	-40~60
Rated Wind Velocity(m/s)	60
Mounting hardware(mm)	30~50

installation instructions:

Downtilt Mounting Kit for Panel Antennas

(1)Please following the steps below: place the antenna on the pole, and adjust the inclination of the antenna, then fasten the screw to the screw nut. The final structure is just like the pictures above.

(2)Place the four studs of the antenna through the holes on the shorter part of the L-shape clamp, then put on the flat washer, the spring washer and screw nuts successively. Then twist the nuts tightly.

(3)Put the end of the antenna with connectors downwards, and place the M6 U-shape screw through the pole whose outer diameter is 30~50mm ,the sawtooth clamp and L-shape clamp. Then put on the flat washers and screw nuts. Lastly, twist the nuts.

(4)Adjust the inclination of the antenna to the proper position to receive the best signal by switching the holes on the longer part of the L-shape clamp. Finally seal all the connections and twist all the nuts tightly.

SAFETY NOTICE:

The installation, maintenance, or removal of an antenna requires qualified, experience personnel. Ameison installation instructions are written for such installation personnel. Antenna systems should be inspected once a year by qualified personnel to verify proper installation, maintenance, and condition of equipment.

Ameison disclaims any liability or responsibility for the results of improper or unsafe installation practices.

It is recommended that transmit power be turned off when the field installation is performed. Follow all applicable safety precautions as shown on this step.

Product Compliance:Regulatory Compliance/Certifications: RoHS and REACH Compliant by Exemption.

P.S.:

I have a weak signal in the area I live and want to increase signal strength to improve download speeds. What antenna should I use?

To find the best solution to increase throughput and signal speed with an antenna several dimensions should be considered.

(1)Indoor / outdoor:

---If you can mount it, a suitable outdoor antenna can deliver much better performance

(2)Directional (panel, LPDA) or omnidirectional antenna:

---If you are in a remote area where the direction of the next base station can be clearly identified, it is best to use a directional antenna and align it with the base station.

----If you are in an (urban) area where there are different signal sources and/or you are working with different providers an omnidirectional antenna offers the better and more flexible solution.

(3)High or low gain:

---In general – the higher the gain the better. But gain correlates with size of an antenna so typically there are limits. Further, if you are in an area with very strong signal strengths, a lower gain antenna may work better.

(4)What about all the other antenna characteristics?

---VSWR (to be amended) Patterns (to be amended)

What is a MIMO Antenna?

A Multi-input Multi-output (MIMO) antenna is one that has two or more antennas in a single physical package.

The advantages of a MIMO antenna is that they offer significant range and throughput compared to traditional WiFi antennas while using the same transmit power. The IEEE 802.11n standard uses MIMO technology to increase performance, range, and reliability.

Factory Infos:

Ameison is proud to offer: high gain antennas for LTE, antennas for 3G, antennas for WLAN, antennas for RFiD, antennas for M2M, MIMO antennas whether omnidirectional, panel, LPDA or patch, with or without cable, indoor and outdoor always with small VSWR, cross-polarized, low loss, low envelope correlation, RoHS compliant, wall or pole or window mount.

Ameison always sticks to the facts but not tell stories.

We’re proud to be part of your network’s story.

Ameison is a trusted resource and partner around the world because we’re invested in you: your people, your networks, your success. It inspires us to build relationships and infrastructure, connect people and technologies across protocols, oceans, and time zones - and share what we learn along the way. We’ll never stop connecting and evolving the business of life at home, at work and on the go.

This is our promise to you.

This is Ameison.

More items want to know, please do not hesitate to visit our company official website or email to request the catalogue to be available, we welcome you to schedule a visit our factory and consult with us for more business benifits.

High-quality! Made In Shenzhen of China! Global Sharing!

To be a business partner with us now!

Shenzhen Ameison Communication Equipment Co.,Ltd.(AMEISON) was established in 2009, is one of leading professional antenna designers, manufacturers and solutions suppliers and only one has our own Antennas Far Field Automatic Measurement System in Shenzhen, China.