Product Details

Product Description

Product Application

Super-speed Electric Thermal Oil Boiler is a new thermal oil boiler which takes electricity as heat source and thermal oil as hot carrier. Utilize compulsory liquid for circulation pump to achieve circulation. Convey heat energy to the thermal equipment, then return back to do heating. Continuous heat transfer achieved. The temperature of the object being heated rises, then it meets the requirement of heating process. Super-speed Electric Thermal Oil Boiler originates the electrical heating tube and electromagnetic heating double systems.The product takes full advantages of these two heating methods and it is tested by experiment on the whole structure and the integrated control system. So our product stays ahead of the similar products in the fields of service life, safety, heating efficiency and heat utilization ratio

PRODUCT PARAMETERS
TYPE	DCZF-F50-O300	DCZF-F150-O300	One more Thing
Heat Power	50kW	150kW	Custom Accepted
Thermal vector	Thermal oil	Thermal oil	Thermal oil
Control Mode	Temperature Controller	Temperature Controller	Temperature Controller
Rated Voltage	380V	380V	380V
Flow	12.5m³/h	12.5m³/h	12.5m³/h
Oil Outlet	DN50	DN50	Custom Accepted
Return-oil Inlet	DN50	DN50	Custom Accepted
Supplement oil port	DN20	DN20	DN20
Sewage outfall	DN15	DN15	DN15
Weight	700kg	700kg	700kg
Outer Dimension	1550x 1280 x 1680mm	1550x 1280 x 1680mm	1550x 1280 x 1680mm
Rated Steam Temperature	300℃	300℃	300℃

Main Features

1) Working life of 8-10 years

Adopts double heating methods of electrcal heating tube and electromagnetic heating.The system will close or start electromagnetic heating mode firstly when the equipment reaches or stays below the set temperature.To adjust the device ioperating power to reach the requirement of set temperature.It extends the service life of the equipment greatly through avoiding repeated switching.

2) Electro-thermal efficiency 96%

operating power to reach the requirement of set temperature.It extends the service life of the equipment greatly through avoiding repeated switching.

Adopting double heating modes of electrical heating tube and electromagnetic heating, taking the greatest advantage of these two modes. Via detection, the thermal efficiency of this equipment reaches highly to 96%, which is far higher than similar products

3) Zero emission
This device uses electricity as heat source.Clean without dust, and no pollution. It is the environmetal heating equipment supported by the national policy.

4) Safety
Every aspect of the design have been through repeated arguments and experimental verifications, in order to make the whole design of the equipment more scientific and rational.

The equipment posses four layers overheat protection, over current protection, interlock protection of hot-oil pump and so on.

5) Intellectual control, Unmanned on duty
It is intellectually controlled by control machine,and it does not need watch by special staff.Besides, it has automatic infection, control and interlock alarming in the meantime.

6）Easy to install, save space

The structure of the equipment is compect. It can be installed conveniently and it does not need dedicated boiler room, which greatly saves equipment operating space.

Temperature control precision can reach to ±1℃

It adopts advanced automatic temperature control mode, namely, it can achieve the automatic adjustment of thermal load through the set temperature feeback conveyed to the control system. In the meantime, the fuzzy control and auto-tuning PID control technology are also combined perfectly on this product, which can make the temperature control precision to ±1℃.

Temperature is adjustable, the highest can reach to 300℃

The equipment is able to automatically distribute the use of two modes of the electricity heating-tube and electromagnetic heating via the set temperature. This is to achieve the set operation requirements with the optimal proportion.

Application Fields

1) Chemical industry-Oleochemical industry, Polymerization industry, Reaction tank, distillation, Concentration.

2) Plastic industry-Plastics foam, Plastic foam, extrusion and stereotypes.

3) Textile industry-resin extrusion setting machine, dyeing machine, drying chamber, high temperature test equipment, drum machine.

4) Rubber industry-the rubber’s sulfide and heating.

5) Food industrial-distillation and boiling, drying , vegetable oil refining.

6) Forestry industry-the heating setting of splint, poly board and fiber plate.

7) Paper industry-the drying of multideck paper.

8) Clothing industry-clothing ironing.

9) Others-the heating of metal electroplating groove, coating condensation, drying, distillation on medical and industrial, reduction, concentration,dehydration, asphalt melting and so on.

Certifications

Customer cases

Cixi Henghe Middle School

There are about 2000 teachers and students in Cixi Henghe Middle School. The school responses positively to the call of the government. They weed out the coal-fired boiler first and replace it with 3 sets of steam generators from our company. One of them with power 50kW is able to heat 200KGS water to 80℃, make 400 KGS rice, 100KGS porridge and 4m dishes in the meantime, al the task could be completed about one and a half hours.

Tianjin Auto Parts Co., Ltd.

The customer produces PVA product with reaction vessel equipment. First of all, put ting powdery PVA into reaction vessel, then adding appropriate amount of water and you will get mixture 3000L/kettle.

Jiangsu Yancheng Masterbatch Co., Ltd.

Customer specializes in raw material products for color mixing. They purchased two sets of 50kW steam generators to replace of one set of 0.5t coal-fired boilers. It can make the raw material in different colors to the set temperature, keep warm, pump down and discharge through heating reactor

Wuqiao wine Co.,Ltd.

Customer response to the local policy of energy saving and environmental protection, replacing one set of 0.3 tons coal-fired boiler by 2 sets of 50KW GMF ultra-high speed intelligent green steam generator, each time 400kgs of vinasse could be put, liquor degree up to 85℃.

To be continue....

Our Service

Remote monitoring and control system

* Ensure safety

* Timely maintenance

* Real-time monitoring

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

Packing & Delivery

Packaging
Size	175 (L) * 148 (W) * 188(D)/CM
Weight	780KG
Packaging Details	The normal package is wooden box(Size: LWH). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

FAQ

Q1.What's your company's main product?

A.Our company is specialized in Environmental friendly Electric Steam Generator, thermal oil boiler and E-TPU foaming material.

Q2.What is your qualification?

A.All our products are with CE approved.

Q3.Where is GMF? Is it possible to visit your factory?

A.GMF is located in Cixi city, Zhejiang Province,which is very closed to Ningbo and Shanghai. Warmly welcome the clients all over the world to visit us.

Q4.What is your warranty period? Do you supply spare parts?

A.The warranty period is ONE YEAR; the spare parts will be offered once you place the order with us.

Q5.Do you provide after sale service?

A.Yes.we have a professional after-sale service team to promptly and thoroughly solve your problems.

Q6.What is your payment terms?

A.Machine:30% paid as deposit after contract signed, 65% to be made before shipment, the rest balance to be made after machine installation and commissioning.

Q7.What is your delivery time?

A. 15-30 days after receipt of downpayment.

Q8.Transporation

A.a)Port of loading:Mainly ship from Shanghai/Ningbo China.
b)Shipping service:by sea
Any more information you need, pls feel free to contact us, we will be happy to be assist of you.

Contact Information