Electric Thermal Oil Heater ,Electric Heat Conducting Oil Furnace,Heat Transfer Oil Boiler

Main Features

1) Working life of 8-10 years

Adopts double heating methods of electrcal heating tube and electromagnetic heating.The system will close or start electromagnetic heating mode firstly when the equipment reaches or stays below the set temperature.To adjust the device ioperating power to reach the requirement of set temperature.It extends the service life of the equipment greatly through avoiding repeated switching.

2) Electro-thermal efficiency 96%

operating power to reach the requirement of set temperature.It extends the service life of the equipment greatly through avoiding repeated switching.

Adopting double heating modes of electrical heating tube and electromagnetic heating, taking the greatest advantage of these two modes. Via detection, the thermal efficiency of this equipment reaches highly to 96%, which is far higher than similar products;

3) Zero emission

This device uses electricity as heat source.Clean without dust, and no pollution. It is the environmetal heating equipment supported by the national policy.

4) Safety
Every aspect of the design have been through repeated arguments and experimental verifications, in order to make the whole design of the equipment more scientific and rational.

The equipment posses four layers overheat protection, over current protection, interlock protection of hot-oil pump and so on.

5) Intellectual control, Unmanned on duty
It is intellectually controlled by control machine,and it does not need watch by special staff.Besides, it has automatic infection, control and interlock alarming in the meantime.

6)Easy to install, save space

The structure of the equipment is compect. It can be installed conveniently and it does not need dedicated boiler room, which greatly saves equipment operating space.

7)Temperature control precision can reach to ±1℃

It adopts advanced automatic temperature control mode, namely, it can achieve the automatic adjustment of thermal load through the set temperature feeback conveyed to the control system. In the meantime, the fuzzy control and auto-tuning PID control technology are also combined perfectly on this product, which can make the temperature control precision to ±1℃.

8)Temperature is adjustable, the highest can reach to 300℃

The equipment is able to automatically distribute the use of two modes of the electricity heating-tube and electromagnetic heating via the set temperature. This is to achieve the set operation requirements with the optimal proportion.

2) Plastic industry-Plastics foam, Plastic foam, extrusion and stereotypes.

3) Textile industry-resin extrusion setting machine, dyeing machine, drying chamber, high temperature test equipment, drum machine.

4) Rubber industry-the rubber’s sulfide and heating.

5) Food industrial-distillation and boiling, drying , vegetable oil refining.

6) Forestry industry-the heating setting of splint, poly board and fiber plate.

7) Paper industry-the drying of multideck paper.

8) Clothing industry-clothing ironing.

9) Others-the heating of metal electroplating groove, coating condensation, drying, distillation on medical and industrial, reduction, concentration,dehydration, asphalt melting and so on.

Save

Save