Product Details

Features
1	High accuracy 0.2% accuracy for all calibrated spans is a standard feature for all DP models covering 0.32kPa range to 500kPa high differential pressure range. 0.1% accuracy is available as option. The compositive monocrystalline piezoresistive sensor assures this accuracy for all elevated or suppressed calibration ranges without additional adjustment.
2	Minimum environmental influence The Advanced Cell design, which protects the pressure sensor against changes in temperature, static pressure, and overpressure substantially reduces total measurement error in actual field applications.
3	Application flexibility Various options that render the CXT suitable for almost any process applications include: –Full range of hazardous area approvals – Built-in RFI filter and lightning arrester – 5-digit LCD meter with engineering unit – Stainless steel electronics housing – Wide selection of anticorrosion materials – High temperature, high vacuum seals

Specifications
1	Span, range
2	Pressure is recommended to be less than flange rating
3	Process temperature, Lower range limit Fill Fluid 13th digit code Process temperature Lower range limit Fluorinated oil W, A, D (-20~120)℃ Atmospheric pressure Silicone oil H (-15~250)℃ Atmospheric pressure Silicone oil J (20~320)℃ Atmospheric pressure Silicone oil Y, G (-40~180)℃ 2.7kPa abs Silicone oil S (-15~250)℃ 2.7kPa abs Silicone oil T (20~320)℃ 2.7kPa abs Silicone oil K (-15~200)℃ 0.13kPa abs C3H8O2 F (-15~120)℃ Atmospheric pressure
4	Performance Specifications for Linear Output (Zero-based calibrated ranges, reference conditions, silicone oil fill, 316L SST isolating diaphragms and 4 to 20mA analog output in linear mode.) Accuracy rating (including linearity, hysteresis, and repeatability) Standard: For spans greater than 1/10 of URL: ±0.2% of span Option (For 21st digit code H and K): For spans greater than 1/10 of URL: ±0.1% of span Stability ±0.2% of upper range limit (URL) for 10 years. Temperature effect Option (For 21st digit code J and K): For spans greater than ¼ of URL: Zero shift: ±0.3% of URL /28℃ Total effect: ±0.4%of URL /28℃ Note: Above specifications are based on the conditions that flange and sensor unit is at the same temperature and in the same level. If temperature is different at flange, capillary or sensor unit, output variation may increase. Static pressure effect For 7th digit code V, A, B, C and D: Zero shift: ±0.2% of URL/ 1MPa Span shift: -0.2% of span/ 1MPa For 7th digit code H, J, M, T, P and R: Zero shift: ±0.4% of URL/ 1Mpa Span shift: -0.2% of span/ 1MPa
5	Physical Specifications Mounting flange material 304 SST or carbon steel Process-wetted parts material Material code Diaphragm & flange face Wetted sensor body V, A, B, C, D 316L SST 316 SST H Hastelloy-C Hastelloy-C J 316L SST + Au coating 316 SST M Monel Monel T Tantalum Tantalum P Titanium Titanium R Zirconium Zirconium Non-wetted parts material Electronics housing Low copper die-cast aluminum alloy finished with polyester coating (silver), or CF8M, as specified. Electronics housing cover Low copper die-cast aluminum alloy finished with polyester coating (atrovirens), or CF8M, as specified. Environmental protection IEC IP67 Mass (weight) Transmitter approximately 10 to 20kg without options Electrical connections ½-14NPT or M20×1.5 conduit, as specified. External terminal M4 screw Process connections ANSI, DIN, HG, GB raised face flange. Diaphragm extension 0mm, 50mm, 100mm or 200mm,Please state when ordering. Mounting On 50A(2B) pipe using mounting bracket, Process-wetted use flange mounting, flange clamping method(Wafer type) Transmission unit position The transmission unit can be turned at 90° or 180°in the clockwise or counterclockwise direction. Length of capillary Up to 10 meters For 7th digit code H,J,S,T,K and capillary more than 7 meters, ambient temperature <+60℃. Armor of capillary PVC or Stainless steel

Item Name	SKDEN Remote Seal Type Differential Pressure Transmitter
Material	Metal
Size	L121W94H190cm
Color	silver and atrovirens
Process	Casting,Stamping,Polishing,Filling Silicon Oil, Painting, Assembly, Calibrating, Packaging
Custom Desigh	Welcome
Service	OEM&ODM
MOQ	1pcs
Sample	Available
Sample Cost,The cost will be returned after placing an order	USD1400
Sample Lead Time	7-15 Days
Payment Terms	T/T, LC at sight,west union,paypal
Packing	carton package with protection material
Production Time	15-30 Days
Delivery Port	Ningbo or Shanghai

Q: Are you a manufacture or a trading company?

A: We are a 20-year-manufacturer engaged in the field of cleaning products, and we have got the permit of import and export as well.

Q: Where is your factory located? How can I visit there?

A: Our factory is located in Hangzhou, China. 25 Minutes by car far away from Xiaoshan Airport.

Q: How can I get the High Quality factory directly endress hauser cerabar m pmp55 pressure transmitter samples? What's the lead time?

A: Samples could be sent within one week, the lead time is 35-45 days..

Q: Do you provide High Quality factory directly endress hauser cerabar m pmp55 pressure transmitter ODM/OEM service?

A: OEM/ODM is welcome, there are 25 persons in our R&D team, and customized colours is optional. From the concept to finished goods, we do all (design, prototype reviewing, tooling and production) in the factory.