Specifications

Plastic extruder for PP PE granulating machine:
1, 300kg/h
2,Hot face cutting
3,Plastic extruder
4, Use Siemens,ABB,Ormon

Plastic extruder for PP PE granulating machine:

 

The extruding machine is mainly used in extruding soft and hard thermoplastics, such as polyvinyl chloride (PVC), polyethylene and others. The plastic extruder is used with relevant auxiliary machine (including the different mould) to produce many kinds of plastic products, for example: profile ,pellet,pipe, film, rod, plate, thread, cable insulating layer, hollow product.

The extruder has advantages, such as advanced design, high output, good plasticification, low energy consumption, involute gear transmission, low noise, steady operation, large loading, and long life.

 

It has many capacity .We can choose it according your detailed requirement .

 

Technical parameters:

 

Model	Diameter of screw(mm)	Ratio of Length and Diameter(L/D)	Max Screw speed(r/min)	Motor Power(KW)	Productivity(kg/h)
SJ-20/25	20	25:1	17-102	2.2	5
SJ-30/25	30	25:1	17-102	4	10
SJ-45/25	45	25:1	8.6-86	7.5	30
SJ-45/28	45	28:1	12-120	11	40
SJ-65/25A	65	25:1	17-84	15-18.5	80
SJ-65/25B	65	25:1	12-120	22	60
SJ-65/28	65	28:1	12-120	30	100
SJ-65/30	65	30:1	12-120	37	140
SJ-70/30	70	30:1	12-180	75	240
SJ-90/30	90	30:1	12-80	55	160
SJ-90/30	90	30:1	12-120	110	350
SJ-120/30	120	30:1	18-120	180	450
SJ-150/30	150	30:1	18-120	180	1000