Specifications

Mould Thermoregulator
1.Way of controlled tempreture:Japan RKC PID
2.Power source:380V 50HZ
3.Media of heater transfer:water

Mould Thermoregulator:

 

This is an automatic controller for the temperature ,use the water as the medium .Set the temperature which you want first ,when the temperature is lower than the temperature ,the heater work ;when the temperature is near the set data ,the heater stop work ;when the temperature is high than the set data ,the medium is entered in the machine ,then the temperature is near the set data .All these process is automatic .Through these process ,you can get constant temperature .

 

If the mould is controled in the constant temperature ,it will be easy to control the dimension of the products ,get the product with good surface ,constant quality .

 

Mould Thermoregulator
Item	MKS-1A	MKS-2A	MKS-3A	MKS-4A	MKS-5A	MKS-6A
Range of controlled tempreture	Normal tempreture -98°C
Way of controlled tempreture	Japan RKC PID adjusted
Power source	380V 50HZ
Media of heater transfer	Water
Way of controlled tempreture	Cooling directly
Heat power	3	6	9	12	20	32
Pumping flow L/min	58	58	66	100	120	200
Motor power kw	0.55	0.75	1.1	1.1	1.5	2.2
Pumping pressure kgf/cm²	5	2	2.5	3	3	4
Cooling water piping	1/2	1/2	1/2	1/2	1/2	11/2
Recirculating water piping	1/2	3/4	3/4	1	1	1
Size	640×310×640	640×310×640	640×310×740	800×350×740	800×400×800	800×400×900
Weight	45	60	70	75	100	110