China factory excellent CE certified wood hot air pipe dryer&sawdust pipe dryer&pipe sawdust dryer  008613253417552

Product Description

HOt SELLINBG :

Frist type  wood hot air pipe dryer  with small capacity( 300-1000kg/h) :

---1, Introduction of wood hot air pipe dryer 

This dryer is suitable for drying materials of moisture 30~60%. The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are put into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer reduces the moisture to 8~12% with the advantages of low cost consumption and high efficiency.

---2, Features of wood hot air pipe dryer 

a. The dryer is suitable for drying materials of moisture 20-70%.
b. Wood dryer is suitable for drying materials like sawdust, rice hull, milling wheat straw, corn stalks and so on.
c. This wood dryer reduces the moisture to 8-12%
d. Clients can change the angle of dryers base on the production field.
e. It is only to control the moisture of raw material at a reasonable range that can make good result of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.

 ---3, Technical parameters of  wood hot air pipe dryer 

The sencond rotary drum type   wood hot air pipe dryer 
with big cappacity ( 1000-3000kg/h )

1. The general introduction of the  wood hot air pipe dryer 
:

 For this type it is not only can be used to dry wood sawdust, , rice husk, biomass powder , but also can be used for drying wood chips and sugar cane bagasse, etc. which is the pre-processing for making pellet, briquette, biomass fuel, etc.

2. The structure of  sawdust dryer machine :

 ♣ Fireplace is the place where the firewood, coal, gas or other material is burning for heat, there is a specially designed buffer which can make the hot air through but provent the fire in.

 ♣  Inlet place is beside the fireplace, thus the material can be dry at a early time.

 ♣  Roller is running evenly to make the material drying and processing at the same time.

 ♣  Discharging unit is installed with thermeter to control drying temperature. The temperature change of dryer's feeding end can be indicated by the thermometer to control the inner drier temperature ( generally 250-350°C)

 ♣ The cyclone is for the discharging, whcih is more convenient and air lock for making the discharging little noise and no waste.

 3.Technical parameters of the  wood hot air pipe dryer  :

  s dryer; wood sawdust dryer;sawdust dryer; wood sawdust dryer; sawdust dryer; wood sawdust dryer;sawdust dryer;

sawdust dryer; wood sawdust dryer;