Description   of   2015    Hot sale salt spray machine  

Specifications
We can choose the UV light wavelengths depending on different test requirements, since every UV radiation and wavelength of the 
Control Devices: the main controller use imported Korean TEMI2700 English controller with precision LCD touch screen which can control temperature and humidity. The controller uses LCD screen which can display parameters, execution time, the heater working condition and PID parameter self-tuning function
 
It can achieve refrigerator run automatically. Control systems have perfect detection device which can perform detailed fault display and alarm function. Korea2700 controller (Touch screen key board); Time Cumulative Timer.
 
Test Sample Quantity About 40 pieces with dimension of 150×75mm; Approximately 40 pieces
Chambers Size D×W×H: 450×1170×500
Temperature Range RT+10℃~70℃
Humidity Range ≥95%R.H
Humidity Uniformity Within±2%
Temperature Uniformity Within±2%
Humidity Fluctuation Within±2%
Distance From Sample to Light 50mm
Ultraviolet Wavelength 290nm~400nmUV-A
Light Power 40W
Sink Depth Requirement Control automatically
Board Temperature 40℃~65℃
Test Time 0-999H(can be adjustable)
Function 01 The chamber is with spray function
Function 02 The chamber with spray function
Temperature Controller With Taiwan Delta touch screen controller+ Japan Mitsubishi PLC control system
Time Controller Japan Omron time controller
Light Heating System Totally independent systems, nickel-chromium alloy electric heater
Humidification System All stainless steel shallow surface evaporative humidifier
Water Supply System Supply water automatically
Exposure Mode Exposure with moisture condensation and light radiation
Safety Protection Leakage, short circuit, over-temperature, water shortages, over-current protect/controller power memory protection

Chapter 02, Usage / Purpose : UV aging chamber is mainly used for simulating sunlight, moisture and temperature damaging effects to material , material aging shows as fading, tarnish ,intensity decreased, cracking, peeling, chalking, and oxidation. Fluorescent UV aging chamber shorten the time to test the material aging phenomenon.
 
UV aging chamber stimulates the light. rain and dew. During the test, the temperature can be controlled. It is usually ultraviolet light at high temperatures and relative 100% humidity in the dark, damp condensation environment; It is used in paint & coatings, automotive, plastics, wood products, glues area and so on.
 
Chapter 03, Stimulate Sunshine: The sun's ultraviolet rays is the main factor to destroy most materials durability. We use ultraviolet lamps to simulate the short-wave ultraviolet part of the light, it produces little visible or infrared spectrum energy.

Chapter 04, UV Light Introduction :
1. UVA-340 Lamps UVA-340 lamps can be excellent simulate shortwave ultraviolet light of sun from 365 to 295 NM. (United States imported lamp).
2. UVB-313 Lamps Shortwave ultraviolet of UVB-313 lamps is stronger than usual sun ultraviolet , so that it can accelerated material aging. However, the tube may cause some damage to the material.
3. UVB-313 Lamps Mainly used for quality control and research development, it is also used to test weather-resistant material.
4. UVA-351 Lamps It stimulates ultraviolet sunlight through window glass, it's the most effective to test aging of interior materials.
 
Chapter 05, Irradiation Intensity Can Be Choosing : Available irradiation intensity options can get exact test results; user can set different light intensities depending on the test requirements. It not only can control the irradiation intensity; but can also prolong the life of fluorescent lamps.
 
1 Box liners are made of SUS304 stainless steel wire drawing board.
2 The shell is made of SUS304 stainless steel wire drawing board.
3 The sample holder is made of stainless steel and aluminum screen frame style, easy  to hold the sample.
4 There is 8 pieces UV  UV-B or UV-A lamp on both sides in the cabinet.
5 With tank heating it is warm fast and distribute temperature uniformly.
6 The case cover is easy to open and close.
7 The bottom of the chamber have high-quality PU wheels.
8 The distance from surface of the sample parallel to UV light plane is 50 mm.
 

 Our customer:

   All above the picture  is just a part of our customer .

 The reasons why other customer choose us:

1.We  proovide best qulity with resonable price.

2.We can control the quality cause we produce by ourself.

3.We have introduced latest technology from Germany.

4.We got servral certificate for our product.

5.We service every customer with heart.

Our  certification:

Please feel  free  to  contact us :

/watch?v=G8Rm8AbJ-Ng
 
/environmentalchambers
 
 
Sanwood tensile testing Equipments :
http://sanwood.en.china.cn/product/60127432596-800480984/tensile_machine.html
 
Sanwood climatic Testing Chambers :
http://sanwood.en.china.cn/product/60127432596-800480984/tensile_machine.html
 
Sanwood xenon lamp Test Chamber :
http://sanwood.en.china.cn/product/60127432596-800480984/tensile_machine.html
 
 

 Thank you for  your time !