Specifications
High fusion efficiency; soft and stable arc; less welding splash,beautiful welding seam and appearance; slag detach-ablity.E316LT1-1:
Specifications
Stainless steel flux cored wires E316LT1-1:
1. Type: AWS E316LT1-1
2. Size: 1.2, 1.6mm
3.Polarity: DC+
Specifications:
Stainless steel flux cored wires E316LT1-1:
1. Type: AWS E316LT1-1
2. Size: 1.2, 1.6mm
3.Polarity: DC+
Chemical composition of the deposited metal (%):
| C | Mn | Si | Cr | Ni | Mo | P | S |
Standard Value | ≤0.04 | 0.5-2.5 | ≤1.0 | 17.0-20.0 | 9.0-14.0 | 2.0-3.0 | ≤0.04 | ≤0.03 |
Example Value | 0.027 | 1.25 | 0.38 | 18.57 | 11.35 | 2.28 | 0.030 | 0.004 |
Mechanical properties of the deposited metal:
| Yield Strength(MPa) | Tensile Strength(MPa) | Elongation (%) | Impact Value J(°C) |
Standard Value | ---- | ≥485 | ≥30 | ---- |
Example Value | ---- | 550 | 43 | 40/-196 |
Feature:
1.It is exhibits excellent qualities when joining 304 stainless and other common austenitic stainless steel grades referred to as "18-8".
2.Usage:316 and 316L
3.Welding Temperature: Less or equal to 350 degrees Celsius.
4.Welding position: It is suitable for all position.
Notice:
1. Wire shall be stocked in dry. Open the packs just when welding to avoid the wire rust.
2. Before welding please clean out the oil, rust, water etc from the work parts.
3. Must use pure CO2.
Specifications
1. soft and stable arc
2. beautiful appearance of weld.good slag detachability
3. fewer spatters
1. This product is a kind of stainless steel gas-shielded flux-cored welding wire.
2. It has excellent welding performance.
3. All-position welding.
4. It is used for welding 16 and 316L Stainless steel
5. Shielding gas: 100% CO2
